pimatic 0.9 install problems - plugins

---

@Thrusty This plugin has not been tested with pimatic 0.9 and is currently not supported

@mwittig Thanks, but that 's a shame .
Then I have to wait . With the signal from the BH1750 my blinds are controlled .
Is there somewhere a list of supported and unsupported plugins ?

Have a look here Supported plugins

Has also been announced in the v0.9 update thread

Since this seems to be an issue with serialport , maybe an update of the dependencies at the package.json will be enough to solve it for the time being?
But don’t know if this will break other plugins?
So you could try to read out the the sensor via shell command and use a shellsensor? Just my 2cents. Maybe this helps (but is in German only) http://www.netzmafia.de/skripten/hardware/RasPi/RasPi_I2C.html

@leader21 said in pimatic 0.9 install problems - plugins:

Since this seems to be an issue with serialport

No, it is not an issue with serialport. It is a base driver for bh1750 written in C++. There is a newer version which compliles OK. There also some more changes required to make the code ready for for pimatic 0.9. I have created a PR with necessary changes. For the time being @Thrusty can trial my for as follows:

sudo npm i mwittig/pimatic-bh1750 --unsafe-perm

@mwittig Thanks for your help. Unfortunately, it seems not to work. I get the following error :

pi@rasppitest:~ $ sudo npm i mwittig/pimatic-bh1750 --unsafe-perm
npm WARN peerDependencies The peer dependency pimatic@>=0.8.0 <1.0.0 included from pimatic-bh1750 will no
npm WARN peerDependencies longer be automatically installed to fulfill the peerDependency 
npm WARN peerDependencies in npm 3+. Your application will need to depend on it explicitly.
npm WARN deprecated lodash@2.4.1: lodash@<3.0.0 is no longer maintained. Upgrade to lodash@^4.0.0.
npm ERR! Linux 4.1.19+
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "i" "mwittig/pimatic-bh1750" "--unsafe-perm"
npm ERR! node v4.4.5
npm ERR! npm  v2.15.5
npm ERR! code EPEERINVALID

npm ERR! peerinvalid The package pimatic@0.9.28 does not satisfy its siblings' peerDependencies requirements!
npm ERR! peerinvalid Peer pimatic-bh1750@0.1.1 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-ping@0.8.14 wants pimatic@0.8.*

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/npm-debug.log

@Thrusty said in pimatic 0.9 install problems - plugins:

npm ERR! peerinvalid Peer pimatic-ping@0.8.14 wants pimatic@0.8.*

Remove pimatic-ping as you have installed the wrong version!
Generally, it is better to install plugins via frontend at the moment as some plugins are still tagged as beta

cd /home/pimatic-app/node-modules
sudo rm -rf pimatic-ping
sudo npm install pimatic-ping@beta --unsafe-perm
sudo service pimatic restart

You may see more 'peerinvalid ’ errors from other plugins you have installed. Please post error message here.

@mwittig Unfortunately, that does not seem to be working.
It looks like I need to remove any plugins ?

pi@rasppitest:~/pimatic-app/node_modules $ sudo rm -rf pimatic-ping
pi@rasppitest:~/pimatic-app/node_modules $ sudo npm install pimatic-ping@beta --unsafe-perm
/
> raw-socket@1.5.0 install /home/pi/pimatic-app/node_modules/pimatic-ping/node_modules/net-ping/node_modules/raw-socket
> node-gyp rebuild

make: Entering directory '/home/pi/pimatic-app/node_modules/pimatic-ping/node_modules/net-ping/node_modules/raw-socket/build'
  CXX(target) Release/obj.target/raw/src/raw.o
  SOLINK_MODULE(target) Release/obj.target/raw.node
  COPY Release/raw.node
make: Leaving directory '/home/pi/pimatic-app/node_modules/pimatic-ping/node_modules/net-ping/node_modules/raw-socket/build'
npm ERR! Linux 4.1.19+
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "pimatic-ping@beta" "--unsafe-perm"
npm ERR! node v4.4.5
npm ERR! npm  v2.15.5
npm ERR! code EPEERINVALID

npm ERR! peerinvalid The package pimatic@0.9.28 does not satisfy its siblings' peerDependencies requirements!
npm ERR! peerinvalid Peer pimatic-cron@0.8.8 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-ds18b20@0.8.9 wants pimatic@=>0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-fritz@0.4.3 wants pimatic@>0.8.91 <1.0.0
npm ERR! peerinvalid Peer pimatic-homeduino@0.9.4 wants pimatic@0.9.*
npm ERR! peerinvalid Peer pimatic-mobile-frontend@0.9.9 wants pimatic@0.9.*
npm ERR! peerinvalid Peer pimatic-ping@0.9.5 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-pushbullet@0.8.4 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-pushover@0.8.5 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-shell-execute@0.9.4 wants pimatic@0.9.*
npm ERR! peerinvalid Peer pimatic-sunrise@0.8.7 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-sysinfo@0.9.4 wants pimatic@0.9.*

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/pimatic-app/node_modules/npm-debug.log
pi@rasppitest:~/pimatic-app/node_modules $ 

@Thrusty said in pimatic 0.9 install problems - plugins:

npm ERR! peerinvalid Peer pimatic-pushbullet@0.8.4 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-pushover@0.8.5 wants pimatic@0.8.*

Pushover is currently not supported. You cany try to install pimatic/pimatic-pushoverthough. Push-bullet isn’t supported either.

EDIT: Updated - There is a new version of pimatic-pushover ready for pimatic 0.9
EDIT2: I have also updated pimatic-pushbullet, now

@mwittig
I have delete pushover and pushbullet, and the installation of ping and mwittig/bh1750 was OK.
Tomorow, I will make the next step.
thx