Much appreciated!
-
New pimatic tradfri plugin / IKEA Smart Lights
-
Thanks so much!!! That was a really quick fix!
-
Hey
I have a problem with the new version, i blocked the internet access for the ikea bridge over the fritzbox (dsl router). Every day after 24 hours pimatic cant reach the bridge anymore and i have to restart the bridge(unplug power etc) to get it working again.
I now re-enabled the internet access and check if its tomorrow okay.
Any ideas that the blocked internet access has a relationship to this?
-
@tehmilcho said in New pimatic tradfri plugin / IKEA Smart Lights:
Any ideas that the blocked internet access has a relationship to this?
Most likely, the bridge runs out of resources due to too many connection attempts or pending requests cause a blocking situation. There is not much one can do against this. Possibly, if the outbound calls have been reverse engineered it is possible to route connections to a fake server which lets the bridge think it is calling home. Something similar had been developed for Amazon dash-buttons simulating the Amazon backend.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
Hey,
just as feedback for somebody that the same Problem. Without the Internet-Access blocked from the IKEA bridge, it works fine.
What a bummer… its against my personal security policy because i block the Internet-access from all my Smartdevices (without Alexa because it will not work without internet), i allow only Pimatic over a Reverse Proxy from my NAS to be available from the Internet . For Exampe i found out that the Milight Wlan-box tries to connect to some weird URLs (cm2.xlink.cn) in China for no Reason, etc
-
Goodday all, in finally installed the Tradfri system and I was not disappointed!
Unfortunately my bridge is running 1.8.26 and after installation I’m not getting a PSK , I get an identity but no PSK.Needless to say discovery doesn’t work now, any chance on a fix??
Update:
After reinstalling the plugin it works! Just have been an error on my side.On the plus side, I can confirm everything works with the newest firmware!!
-
This post is deleted!
-
@kosta Hey Kosta, does this mean the Raspbee plugin is the ‘new’ Tradfri plugin?
-
@Stokstaart
oh sorry, the post was on a wrong threadyeah, it’s definitely a very good alternative.
but you need a zigbee dongle. see here
then you can control all zigbee devices with the plugin.
Philips hue, xiaomi/aqara senoren, tradfri, and many more
supported devices
with the dongle you can replace all vendors gateways -
Hey.
Will you be adding the new tradfri blinds? Fyrtur I believe they are called?
-
@simonbove said in New pimatic tradfri plugin / IKEA Smart Lights:
called
I hope also for it… But in at moment there are still not available in Germany 😠
-
yes i will implement the new blinds in the tradfri plugin as well.
I created a Github bug for tracking.
https://github.com/treban/pimatic-tradfri/issues/37 -
Seems something changed after the last Tradfri Hub update. It works, but I get now following message:
-
Just a simple hack, but the message just bugged me too much
I changed following line in the tradfri.coffee (/pimatic-app/node_modules/pimatic-tradfri/tradfri.coffee) from
env.logger.error
toenv.logger.warn
:# env.logger.error("Tradfri gateway is not reachable anymore!") env.logger.warn("Tradfri gateway is not reachable anymore!")
Result: Silence
-
hi @OrTiN
i’ve been very busy the last months. i’ll see if i can find time for the plugin the next days.You’ve already opened a bug. We should keep further steps towards resolution there.
https://github.com/treban/pimatic-tradfri/issues/41 -
How do the scenes work in a rule?
I have a 443mhz switch (Klikaan-Klikuit) working, and when I push this I want to apply a scene that it’s in the tradfri hub.
I can switch the scenes manually in pimatic, that’s working. But I can’t find how to apply that in a rule?Simple dimming works, but if I change the colours of the lights in the evening, I want to have them white again in the morning…
-
I’ve added the TradfriGroupScene.
That last one was the clue, you need to add a rulepress button <Scene>
, now it works!Thankx!