@wuschel I think I have a similar problem
Startup error: Error: Error running “./node_modules/pimatic/ppm.js install sqlite3@3.1.3”: error This version of node/NAN/v8 requires a C++11 compiler
I have read something about updating GCC to GCC5
Questions about the release of v0.9
@wuschel I think I have a similar problem
Startup error: Error: Error running “./node_modules/pimatic/ppm.js install sqlite3@3.1.3”: error This version of node/NAN/v8 requires a C++11 compiler
I have read something about updating GCC to GCC5
@Barny said in Questions about the release of v0.9:
@wuschel I think I have a similar problem
Startup error: Error: Error running “./node_modules/pimatic/ppm.js install sqlite3@3.1.3”: error This version of node/NAN/v8 requires a C++11 compiler
I have read something about updating GCC to GCC5
Yes, i read this
https://github.com/node-inspector/node-inspector/issues/776
You need at least gcc 4.9. If you still using raspbian wheezy, either update to jessie (recommended) or use this tutorial to install gcc 4.9 (however you have to make sure that your gcc binary is pointing to gcc4.9.)
with the new jessie
error with this “not found: git”
pi@raspberrypi:~ $ npm install pimatic --prefix pimatic-app --production
npm ERR! git clone --template=/home/pi/.npm/_git-remotes/_templates --mirror https://github.com/sweetpi/jsonlint.git /home/pi/.npm/_git-remotes/https-github-com-sweetpi-jsonlint-git-fccf491e: undefined
npm ERR! git clone --template=/home/pi/.npm/_git-remotes/_templates --mirror https://github.com/sweetpi/jsonlint.git /home/pi/.npm/_git-remotes/https-github-com-sweetpi-jsonlint-git-fccf491e: undefined
npm ERR! Linux 4.4.11+
npm ERR! argv “/usr/local/bin/node” “/usr/local/bin/npm” “install” “pimatic” “–prefix” “pimatic-app” "–production"
npm ERR! node v4.4.5
npm ERR! npm v2.15.5
npm ERR! code ENOGIT
npm ERR! not found: git
npm ERR!
npm ERR! Failed using git.
npm ERR! This is most likely not a problem with npm itself.
npm ERR! Please check if you have git installed and in your PATH.
npm ERR! Please include the following file with any support request:
npm ERR! /home/pi/npm-debug.log
pi@raspberrypi:~ $
I have updated my pimatic until step 5 of the procedure in the announcement. But then I can’t start it using the link pimatic.js
. Also in my usr/local/lib/node_modules
there is only one entry, npm
.
So how to start pimatic 0.9?
Hi all,
Thank you for the new version
The installation went smoothly.
The only problem is autostart pimatic…(starts only with pimatic.js start)
pi@pi:~ $ wget https://raw.github.com/pimatic/pimatic/master/install/pimatic-init-d
–2016-06-19 21:58:18-- https://raw.github.com/pimatic/pimatic/master/install/pimatic-init-d
Resolving raw.github.com (raw.github.com)… 185.31.19.133
Connecting to raw.github.com (raw.github.com)|185.31.19.133|:443… connected.
HTTP request sent, awaiting response… 301 Moved Permanently
Location: https://raw.githubusercontent.com/pimatic/pimatic/master/install/pimatic-init-d [following]
–2016-06-19 21:58:19-- https://raw.githubusercontent.com/pimatic/pimatic/master/install/pimatic-init-d
Resolving raw.githubusercontent.com (raw.githubusercontent.com)… 185.31.19.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.31.19.133|:443… connected.
HTTP request sent, awaiting response… 404 Not Found
2016-06-19 21:58:19 ERROR 404: Not Found.
@wuschel said in Questions about the release of v0.9:
error with this “not found: git”
You need to install git: sudo apt-get install git
It is required as pimatic (and some plugins) use some packages residing in a git repository rather than being deployed at NpmJS. We’ll add this as a requirement to the installation guide.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
@Andi-Tudor said in Questions about the release of v0.9:
Hi all,
Thank you for the new version
The installation went smoothly.
The only problem is autostart pimatic…(starts only with pimatic.js start)pi@pi:~ $ wget https://raw.github.com/pimatic/pimatic/master/install/pimatic-init-d
–2016-06-19 21:58:18-- https://raw.github.com/pimatic/pimatic/master/install/pimatic-init-d
Resolving raw.github.com (raw.github.com)… 185.31.19.133
Connecting to raw.github.com (raw.github.com)|185.31.19.133|:443… connected.
HTTP request sent, awaiting response… 301 Moved Permanently
Location: https://raw.githubusercontent.com/pimatic/pimatic/master/install/pimatic-init-d [following]
–2016-06-19 21:58:19-- https://raw.githubusercontent.com/pimatic/pimatic/master/install/pimatic-init-d
Resolving raw.githubusercontent.com (raw.githubusercontent.com)… 185.31.19.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.31.19.133|:443… connected.
HTTP request sent, awaiting response… 404 Not Found
2016-06-19 21:58:19 ERROR 404: Not Found.
I have the same issue, foudn the file on github, but it doesn’t work, comes with an error that some things are missing… Will try to find what the error is
@Cryonic90 said in Questions about the release of v0.9:
HTTP request sent, awaiting response… 404 Not Found
For some reason there is no master at the moment. Use the following link instead: https://raw.githubusercontent.com/pimatic/pimatic/v0.9.x/install/pimatic-init-d
EDIT: Master has been recovered. So, the orginal link should work now.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Thank you. it works
Hi I have the following error output:
npm ERR! Linux 3.10.96-148
npm ERR! argv “/usr/local/bin/node” “/usr/local/bin/npm” “install” “pimatic” “–prefix” “pimatic-app” "–production"
npm ERR! node v4.4.5
npm ERR! npm v2.15.5
npm ERR! code EPEERINVALID
npm ERR! peerinvalid The package pimatic@0.9.26 does not satisfy its siblings’ peerDependencies requirements!
npm ERR! peerinvalid Peer pimatic-calendar@0.8.0 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-cron@0.8.8 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-dewpoint@0.8.4 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-gpio@0.8.15 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-ifttt@0.1.1 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-lcd@0.8.3 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-links@0.8.6 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-log-reader@0.8.9 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-max@0.8.17 wants pimatic@>=0.8.31 <1.0.0
npm ERR! peerinvalid Peer pimatic-mobile-frontend@0.8.83 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-mqtt@0.8.12 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-mysensors@0.8.34 wants pimatic@>=0.8.0 <1.0.0
npm ERR! peerinvalid Peer pimatic-ping@0.8.14 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-pushover@0.8.5 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-shell-execute@0.8.22 wants pimatic@0.8.*
npm ERR! peerinvalid Peer pimatic-sysinfo@0.8.14 wants pimatic@0.8.*
npm ERR! Please include the following file with any support request:
npm ERR! /home/odroid/npm-debug.log
Can someone please help me?
I can not discover Homeduino rfdevices (nor through debug messages).
I manually added all rfdevices (from pimatic 0.8.107). The only way it works
The only devices discovered:
pimatic-ping: Scanning 192.168.1.220/24
pimatic-mysensors: Searching for nodes
pimatic-milight-reloaded: Scanning 192.168.1.0/24
@Andi-Tudor
in the announcement threat on the bottom you can read about this. You need to set the following on the config.json
"debug": true,
"logLevel": "debug",
So you can see the debug messages again.
A discovery for Homeduino rf devices is not yet implemented.
But if you have your debug data you are now able to quickly create a new device on the fly with the device editor.
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
GUYS PLS. OPEN A NEW THREAD FOR EACH ISSUE
This here is getting complicated to follow and to answer.
Thx!!
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
Hi everyone,
what are the new features of 0.9?
Cheers,
Leopold
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
@Anduril said in Questions about the release of v0.9:
I have updated my pimatic until step 5 of the procedure in the announcement. But then I can’t start it using the link
pimatic.js
. Also in myusr/local/lib/node_modules
there is only one entry,npm
.
So how to start pimatic 0.9?
Do a
cd /usr/local/bin
sudo ln -s /home/pi/pimatic-app/node_modules/pimatic/pimatic.js
Locations have changed. I had the same.
@Harry-van-der-Wolf said in Questions about the release of v0.9:
cd /usr/local/bin
sudo ln -s /home/pi/
Or simply use sudo npm link
which works great if you have a proper node setup. See also “Installing Globally” at https://pimatic.org/guide/getting-started/running/
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
@kwittwer
the errors you see don’t really matter.
pimatic should start anyway
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
@Harry-van-der-Wolf @mwittig yeah if done this just yesterday evening and recreated the link. Seems to be working fine. Thank you.