Guys, which type of bulbs do you have? See also my previous post which has not been answered
-
New plugin for Milight - pimatic-milight-reloaded
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
I have Milight RGB 6W lights and Milight RGB Spots.
But i think the problem is in the MilightFullColorZone class in combination with the automatic rules.Please use the MilightFullColorZone class and try the following rule:
milight set color (devicename) to blue.
Then u see the problem we have!
-
@eStadhouders said in New plugin for Milight - pimatic-milight-reloaded:
But i think the problem is in the MilightFullColorZone class in combination with the automatic rules.
No, I think the problem is that you use the wrong device class.
MilightFullColorZone is for the new RGB WW/CW 9W bulbs.
For RGBW bulbs you need to use the MilightRGBWZone"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
I think u don’t understand what the exactly problem is.
The bulb (RGB) is responding perfect, when i use the sliders.The problem is in the rules of the MilightFullColorZone class
Please try this:
- Add a new device class: MilightFullColorZone
- Add this in your configuration
- Make this rule: milight set color (device) to blue
-
@philreis said in New plugin for Milight - pimatic-milight-reloaded:
I want to know when the mode funktion are avaible? It´s a very nice Plugin but this is a Point which i miss.
Now supported, as part of pimatic-milight-reloaded@0.9.8. See README for details
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
Hello, thanks for the Update. I will try it.
I have a Problem at the Version 0.9.9, i can’t turn off my LED Strip. I maked a Rule when i press a Button to turn off all my Devices.When i configure “dim LED Strip to 1%” works fine. But when i configure “dim LED Strip to 0%” it don’t work.
The disco mode i ckeck tomorrow
Another Problem which I have is when i set the Color to Blue the LED Strip light up Green. But i think that is a Problem with Milight. I have the Same Problem with the Remote Control.
I use this Modules:
Interessanten Artikel bei eBay ansehen http://www.ebay.de/itm/162490023324
-
Hello I have 2 days ago this error (after the update).
My milight devices no longer go to 0%. They are off but in the pimatic they are marked as on.
http://img279.imagevenue.com/img.php?image=686279475_Unbenannt_122_162lo.jpg
-
@mwittig can you fixx the bug with the slider ?!
-
Hello, I’m using the plugin for a while now and it’s working great.
Since a few day I also use the milight set color option. Now I have the following problem, when I set the color of a milight to like #fdb813 and turn it off after and then when I try to turn it on by the slider I get this error: “Cannot read property ‘toString’ of undefined” and I’m unable to turn the light on.
Does anyone else have the same problem?
-
@Gratizzz said in New plugin for Milight - pimatic-milight-reloaded:
Hello, I’m using the plugin for a while now and it’s working great.
Since a few day I also use the milight set color option. Now I have the following problem, when I set the color of a milight to like #fdb813 and turn it off after and then when I try to turn it on by the slider I get this error: “Cannot read property ‘toString’ of undefined” and I’m unable to turn the light on.
Does anyone else have the same problem?
Hi,
i have the same error, but with 1-2 restarts solved this problem for some time.I have another “problem” after a pi restart all milight devices goes to 100%, thats realy annoying.
-
Hi.
Thank you for a great plugin.
I’m using the v6 bridge with the built-in light.
Running the pimatic on an old raspberry pi with the latest plugin installed.I’m using both the old RGB warn white led bulbs and the new rgbww bulbs where we have both warm white and cool white led inside.
My problem is, I can’t change the color tone of the whiteso far. light from cold to the warm setting. But all the other colors are working fine.
Is there a specific command to change the color temperature of the white light in the new bulbs?
Thank you again for the great work you have done so far.
-
Hello community,
I have the old V4 Wifi Bridge running with some LED Stripe controllers. Does this old bridge support the Milight bulbs like the E14 one from this auction: modDzvouEhHB5UVqK7U5ElQ" target="_blank" rel="noopener noreferrer nofollow">http://www.ebay.de/itm/RGBW-W-WW-E27-GU10-E14-9W-LED-Light-Dimmable-RGB-Bulb-Lamp-2-4G-Wireless-Milight/291892216966?epid=1081815887&hash=item43f621c486modDzvouEhHB5UVqK7U5ElQIf not, which wifi box supports both (stripes and bulbs) and is better supported by pimatic milight reloaded?
-
@SaxnPaule said in New plugin for Milight - pimatic-milight-reloaded:
Does this old bridge support the Milight bulbs like the E14 one from this auction
I haven’t tried the E14 ones, but the E27 6W RGBWW work for me with the V4 controller. E27 9W RGBWW should also work according to what other users reported earlier.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
Thank you. I’ll report when my bulbs arrive.
-
@mwittig said in New plugin for Milight - pimatic-milight-reloaded:
@SaxnPaule said in New plugin for Milight - pimatic-milight-reloaded:
Does this old bridge support the Milight bulbs like the E14 one from this auction
I haven’t tried the E14 ones, but the E27 6W RGBWW work for me with the V4 controller. E27 9W RGBWW should also work according to what other users reported earlier.
What is with the issue from me and Gratizz ? Can u fixx that?
-
My five E14 RGBWW bulbs arrived. One could not be linked
In pimatic the only class that works is the “Milight V6 Full Color Zone”.
It would be great, if there is also the possibility to set the color to white and only adjust brightness and color temperature. Should I test another config for you @mwittig ?
Exactly that is what I need:- Implemented actions to control color temperature and brightness for MilightWWCWZone
At the moment I use them with the iBox2 V6 bridge, because all 4 zones of the V4 bridge are in use.
-
This post is deleted!
-
Is it also possible to control the wifibox with the built-in light? Of only the zones?
-
@rob-jager said in New plugin for Milight - pimatic-milight-reloaded:
Is it also possible to control the wifibox with the built-in light? Of only the zones?
Yes, it is supported. That’s the iBox 1 wifi controller. The device type is MilightBridgeLight
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
@mwittig is there something wrong with my configuration or is the CWWW zone not supported by RGBWW bulbs? See post above.