Hello everybody.
First, I want to say that the community and specially the developer from Pimatic make excellent work.
My problem is that my Relay what i connect on the RPI2 and via GpioSwitch-class communicate not correctly start.
Everytime if I start my RPI, the Relay goes for a short time on and then out. I can use the Relay in the web-gui correctly.
At first i have the Relay connect on the homeduino and there was the same problem.
I have solve the Problem but it was a mistake of myself and not the solution
Here is a part of my config-File
- “devices”: [
{
“id”: “ALARM_Pimatic”,
“class”: “GpioSwitch”,
“name”: “ALARM SIRENE”,
“gpio”: 17,
“inverted”: “false”,
“defaultState”: false
},
You see on the Reay is a Alarm an thats not good if this device goes on
ok, i solve the Problem by a mistake of myself.
I have the value from inverted witch is a boolean Variable set in quotation marks.
Now the Relay goes not On by the start of RPI but it I can use it very well with the rules or web-gui.
I get an error in the daemon.log that there is a mistake in this device.
If I delete the line or only the quotation marks the Relay can i use but everytime if I start the RPI the problem comes out
the Alarm goes on for 1 or 2 seconds.
Maybe someone can help me
Best regards