Hi,
I have added a Arduino board and attached 433Mhz Receiver and Transmitter cause I wan’t to control my 2011’ Tevion radio socket.
The configuration is done like written in this article: http://siio.de/raspberry-pi-diy-zentrale-update-neue-pimatic-version-mit-arduino-plugin/
When starting pimatic, it says Homeduino attached, so Homeduino itself seems to work fine.
sh ls /dev/ttyUSB*
/dev/ttyUSB0
When checking the debug log in pimatic with source homeduino, and switching the sockets on and off, there is noting displayed.
Already checked the connection to the transmitter and receiver, they seem to be ok.
Could someone give my advice how to do some further troubleshooting? I’m not that familiar with Arduino und 433Mhz devices attached to it
thanks