@mwittig My Wifi370 is having problems with the plugin, is the milight fully working?
https://github.com/philip1986/pimatic-led-light/issues/27
-
[Solved] 12 V LED Dimmer/Switch 433mhz compatible with pimatic
Follow my domotica project on http://maredana.nl
-
@incmve said:
is the milight fully working?
Good point! I should have mentioned that. To date, it is only fully working with my fork. Hopefully, @philip1986 will integrate the pending PR. My fork can be installed as descibed here: http://forum.pimatic.org/topic/881/solved-error-message-with-installing-pimatic-led-light/6
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
Hello hyperx,
yes - i thougt - her`s the link for details:
http://www.klikaanklikuit.nl/shop/media/custom/upload/File-1412752127.pdfThank you for the link - but i want to know if someone
uses one of these dimmers successfully to know if it is compatible with pimatic/homeduino. -
Hi,
i will try my luck with the ACM-LV24 Mini 12-24 V LED dimmer. (ordered…)
If this wont work - i’ll have a look at the Wifi370/LW12 Wifi LED. -
I do Also have a acm and it works great.
-
Hi,
my CoCo ACM-LV24 just arrived.
My question, can someone help me to integrate it?I don’t have an CoCo remote.
Only the Raspi with Homeduino Plugin an RF Sender/Receiver.I found this:
http://forum.pimatic.org/topic/583/dimmer-for-a-pimatic-noob/9But it only explains, how to integrate the slider.
I need to know how to find the ID / Unit for it.
And how to have an On/Of Switch with Slider for dimming… -
You dont need to find the id and unit, you can make one yourself. Try this one:
{ "id": "dimmer", "name": "Dimmer", "class": "HomeduinoRFDimmer", "protocols": [ { "name": "dimmer1", "options": { "id": 12345, "unit": 0 } } ] },
-
Hello sweebee,
ok, this was easy
So i can define an ID for every Switch/Dimmer.
Is there a limit for the unit?!
Or can i have ID: 123456 - and unit 1 till unit 100 ?And last question about the ACM-LV24 - can i have an on/off Switch, too and the dimming slider?
And… is there a way to calibrate the dimming?! -
You have to add a separate switch to set it on/off only in pimatic (just like a normal coco switch).
Don’t know what the range of the id’s and unit’s is.
What do you mean by calibrating? The coco dimmers have 15 dim levels.
-
Hi,
okey thx for the information.
Works perfect