@cees OK, here is a first implementation of the new protocol (weather11). You can install it by executing the steps below (assuming pimatic is installed on raspberry pi).
If the git command is not available on your system, you need to install it first (sudo apt-get install git
). After the installation you should see ‘weather11’ candidates in your log file.
Once the protocol has bee proven to work I’ll create a pull request to get included as part of the pimatic-homeduino release.
sudo service pimatic stop
cd ~/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules
sudo mv ./rfcontroljs ./rfcontroljs.bak
sudo git clone https://github.com/mwittig/rfcontroljs.git
cd rfcontroljs
sudo npm install
sudo service pimatic start