sudo apt-get install libstdc+±6-dev
libstdc+±6-dev package cannot be found
sudo rm -rf node_moduledoes that I believe and did not give an error.
I see this.
Pimatic restarted several times and browser also refreshed.
Still having the ttyUSB1 error.
In the log file the homeduino 0.9.12 seems to be working now, plugin is loaded and messages are arriving.
Issue with Chrome browser solved by removing and reinstalling Chrome.
Did you solve the problem with the shutter3 protocol? If so, how?
I also have the problem that I can’t switch my shutters anymore.
However, I have Homeduino 0.9.18 and pimatic 0.9.52 in the meantime.
I had Homeduino 0.9.12 and then nothing installed. I have started the change only now.
I switched from pimatic 0.9.47 and Homeduino 0.9.11 to the newer versions. But also with node 4.6.2 and npm 2.15.11 before update.
"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
Yes, for me it is working. Did you try to relearn at least one module for test?
Yes, I relearned it. But I really don’t know if this was really necessary. Just try one device.
If you need some spare actors contact me. I have some rohrmotor24 wall switches here.
Looks like your connection to pimatic forum was lost, please wait while we try to reconnect.