This topic is meant for ready to use (wireless) hardware that can communicate with a plugin. Like 433mhz switches, sensors or devices that can communicate with an other wireless protocol like wifi.

I will start and add new devices if someone else posts their working devices.

Brand: the brand of the product
Model: the modelnumber of the product
Type: what type of device is it? More info HERE
Description: What kind of device is it?
Notes: Are there any specific problems or advantages?

Switches

Plugin: pimatic homeduino
Config example

Cooker Hoods

Plugin: pimatic homeduino

Dimmers

Plugin: pimatic homeduino
Config example

Shutters

Plugin: pimatic homeduino
Config example

Smoke Detectors

Plugin: pimatic homeduino

Sensors

Plugin: pimatic homeduino
Config example

Weather

Plugin: pimatic homeduino
Config example

Brand	Model	Type	Batt. Indicator	Description	Notes
Logilink	WS0002	Weather 1	?	Measures temperature and humidity	broadcasts every 30(!) seconds, weak sender BUY
DANIU / Various CN Brands	Weather Station Digital Thermometer Humidity Sensor	Weather 1	?	Indoor & outdoor temperature & humidity	Wall mount or table stand, BUY
Auriol	IAN 91838 (Z31743A-TX)	Weather 7	?	Measures temperature
TFA	30.3125	Weather 17	?	Measures temperature and humidity	Does not work according to recent user feedback
TFA	30.3200	Weather 3	?	Measures temperature and humidity	Configuration via auto-discovery might not work. Use debug mode.
Xiron	Weather Station	Weather 11	?	Measures temperature and humidity	BUY here or on eBay
Xiron	Weather Station 2	Weather 13	?	Measures temperature and humidity	Apparently, a newer make or slighty different model of the weather sensor
Globaltronics	GT-WT-01	Weather 12	?	Measures temperature and humidity	Sensor for the GT-WS-06s weather station. Has been solvd by Lidl, Aldi and Blokker. Manuals available at http://www.gt-support.de
Sempre	GT-WT-02	Weather 6	?	Measures temperature	Sensor for the GT-WS-08 and GT-WS-10 weather station. Has been solvd by Aldi. Manuals available at http://www.gt-support.de
Mebus/Renkforce	E0190T	Weather 18	?	Measures temperature	Buy
Landmann BBQ Thermometer	selection - 13625	Weather 19	?	Measures temperature	Product Info
FreeTEC	PT-250	Weather 15	?	433 MHz wireless Pool Temperature Sensor	sends every 50s, waterproof IPX8, good range after ‘styrofoam ring mod’, three channels, C and F, 2 x 1.5V AAA Batteries, Amazon.de

Heating

Measuring

So please post your working devices and if there are any special details about it, post it.

Others

NOT SUPPORTED

Good idea,
there should also be a way to give additional instructions for some of them?
I’m missing information about way to contact them >> plugin and settings maybe
In general this is job of an WIKI > so we are missing this too .

Brand: elro
Model: AB440S / xx
Type: switch2
Description: socket switch
Notes: usable via pimatic-plugin-homduino
set values from dip-switches: !values starting from the right side!
housecode: dip-sw [ 1 2 3 4 5] = [value 16+8+4+2+1]
unitCode: dip-sw [A B C D E] = [value 16+8+4+2+1]

over signal from ebay cheap transmitter reachable through 3 walls max about 13m

eq-3 MAX! Thermostats and additional Hardware

Brand: eq-3 / ELV-elektronik
Model: Heizkörperthermostat MAX! no: 99017 - Standard
Type: max-heating-thermostat
Description: heating-thermostat
Notes: usable via MAX!-Cube Gateway and pimatic-plugin-max
set RF-address from MAX! Software or events-log in pimatic

Model: Heizkörperthermostat+ MAX! no: 105936 - Plus+Version
!! with some more features: better display and programmable at local buttons
Should be the same function but I don’t own one to tell you

I will add a column with the plugin that is needed tonight, with a direct link. And maybe a config code how to add them?

Is there a way to add padding to the tables?

@sweebee said:

Is there a way to add padding to the tables?

I did some magic.

Thank you! that looks great.

Wouldn’t it be better to maintain this list here:
https://github.com/pimatic/rfcontroljs/blob/master/protocols.md

Its an option, but i want to add all devices, not just 433mhz devices.

Brand: Pollin
Model: PFS-3
Type: switch2
Description: Socket Switch
Notes: usable via pimatic-plugin-homeduino

• Info HowTo use it via pimatic-plugin-homduino
• Pollin Ordering Number: 550 666 and 550 694
• housecode: dip-sw [ 1 2 3 4 5] = [value 16+8+4+2+1]
• unitCode: dip-sw [A B C D E] = [value 16+8+4+2+1]

@demlak Thanks! added.

please use the correct link to the info… your link just goes to the thread start… and there are many irrelevant postings… so… please link to: http://forum.pimatic.org/topic/180/use-rf-switches-without-pilight/18#

inkluding the # at the end

thx

Please add:

Model: Heizkörperthermostat+ MAX! no: 105936 - Plus+Version

working like MAX! 99017 normal Version.

Please add this rf switchs:

Brand: DEMA.
Protocol: switch6

• link and photos:
  http://www.ebay.de/itm/Set-Funksteckdosenset-4x-Funk-Steckdose-3680-Watt-59009-/360414783971?_trkparms=algo%3DPI.WATCH%26its%3DC%26itu%3DUCC%26otn%3D10%26ps%3D63%26clkid%3D4523449518846904616&_qi=RTM839989&_trksid=p2047675.l2557&nma=true&si=MZLPxdZZ6FEy6oWxC6fmGFcwso0%3D&orig_cvip=true&rt=nc

Brand Auriol
Model IAN 91838 (Z31743A-TX)
Type Weather 7
Description Measures temperature

@tomansi @Heizelmann Thanks, added!

@Pimagical This thread is focusing on which 433Mhz/868Mhz sensors and actors are supported by the homeduino and max plugins and which settings apply.The thread you’re referencing is more about where you can by cheap hardware for your tinkering projects.

Brand: Elro
Model: HE-852
Type: doorbell1
Description: Magnetic switch
Notes: usable via pimatic-plugin-homeduino

Info HowTo use it via pimatic-plugin-homduino

   {
      "id": "Door-Contact",
      "name": "Door",
      "class": "HomeduinoRFContactSensor",
      "protocols": [
        {
          "name": "doorbell1",
          "options": {
            "unit": 1399,    **<-- See Debug-Output**
            "id": 3957        **<-- See Debug-Output**
          }
        }
      ]
    }

I have found this shutter radio switches that can be operated with a manual switch:

Brand: Romotec
Type: remute roller shutter switch
protocol: shutter3

Ebay

Willy has built a working protocol for it. Here you can read more about it.
And here there is a little manual in English and German .