OK, sounds good.
Can you do more tests? Can you test the different channels with the 3 states of each?
If this test works, we can officially publish the protocol.
-
[Solved] Nice shutter device with hand switch option, but wihtout protocol - shutter3
-
Have still a problem , the shutter works on the " high " and " Stop " command . Not yet on " Down "
"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
I saw it when i did the next protocol.
Will update the protocol and post it here. -
@Thrusty
This is the new one: shutter3.js
Now right click and “ziel speichern unter” work. -
@Willy Now it works all, up stop down. Very nice. I’m happy.
How can i change the Channel? With change the unit number to 2 or 3…?
"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
@Thrusty
Yes, just change the number of the unit according to your channel number. -
@Willy
wouldn’t it be better to rename “unit” to “channel” then or isn’t that possible or a bad idea?!pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
In the switch protocols we also have id and unit. To stay similar i chose the same names.
Changing unit to channel not a big deal. Since it is not public i would leave it and wait for an comment from Icesory or sweetpi.
Because then we have to change it in the other shutter protocols also. -
@Willy
ah ok. understand. were just my two cents …pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
@Willy Excuse me, but I can at the moment not teach the second receiver, the description is really the last , China waste.
On Monday I 'm going to call the Ebay seller. Maybe my remote control is broken."Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
OK,
the main thing is that your shutter is working
-
@Willy hi , now it works .
It works with two receivers . More I have not yet . Very good work of you . Thanks again .
The problem was in the wrong description .
I could make a purely short description in the hardware section of the forum if anyone is interested in this Shutter Switch with manual switch."Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
OK,
please write the manual.
I think the swich is interesting for more people, because of its price and the possibility of using a seperate hardware push-button. -
Hi @Thrusty,
I changed “unit” to “channel”.
Download the new file: shutter3.js -
@Willy Thanks, i will install it.
"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
@Willy i have installed it. First i tested without changed. Its work without changed “unit” to “channel”.
Then i tested it with changed “unit” to “channel” and its also work.
Is it normal?"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
@Thrusty
Seems that it will work with both.
But to stay clean use “channel”. -
@Willy OK
"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
