sometimes my pimatic is responding really delayed on switching commands or PIR inputs. I use a raspberry3 and a homeduino+mysensor nodes.
It seems like pimatic goes in some sort of idle mode and after the initial first switching that takes up to 3 seconds it reacts really snappy for some time again.
Thanks in advance
sure it is related to pimatic itself or maybe the device you are “working on” is a bit slow?
i am having a similar issue with my phone, since it’s a bit slow due to many apps and ram at it’s capacity end … it sometimes reacts really slow when some apps are active running in the background.
Its hard to tell whats causing the problem.
The Raspberry3 has nothing on it beside the pimatic-system.
I have a mysensorsPIR in the wardrobe and a rule that when the PIR is present the RFsocket turns on the light.
Most of the times everything works perfect and within a second.
But sometimes the socket takes up to 10 secondes to turn on.
I have a lot of these PIR in the house and sometimes ( not often) they just react really slowly.