Conrad RSL RF 433Mhz system not supported?

---

Hi,
just curious. In Austria and Germany the RSL RF switchsystem from Conrad is pretty common. This devices are all 433MHZ RF switches for current, light and other devices. I have not been able to find a protocol which is supporting these switches currently. Is there really no one using them together with pimatic?

https://www.conrad.at/de/funkschaltsystem-rsl-c38084.html

br
Michael

well actually it seems that no one has asked for a protocol yet.
if you are having debug data, maybe there’s a possibility to create it.

@merphun Maybe the Conrad stuff just works out-of-the-box as it is likely to be a branded product (Intertechno, apparently, according to FHEM mit Conrad RSL Funktsystem nutzen) . If not, there is a good chance someone can implement it for you if you can provide debug data. If you have not pruchased stuff yet it might be better to opt for Kaku devices which are on the list of supported devices - see http://forum.pimatic.org/topic/35/supported-devices-plug-and-play

Side note: The list of supported devices is incomplete! According to Supported Protocols Intertechno devices should work!

Just wanted to add that the Conrad RSL366R Socket Switch is supported. However, this does not necessarily means all RSL devices are supported, eventhough Conrad is claiming full compatibility amongst these.

I have added a request to add the device to list of supported devices.

Hi,
thanks for your fast and informative replies! As for the kaku switches, they are not really available in stores in Austria. So I decided now to give intertechno a try and ordered these switches. In worst case I’ll add a hard coded protocol by myself. I already did this with the old RS-200 conrad switches.

bR / Thanks
Michael

intertechno works out of the box. having more of these here.
intertechno is switch4 protocol.

@merphun said:

I already did this with the old RS-200 conrad switches.

Did you contribute your code for RS-200? Is it the same as for Europe RS-200 (see Switch12)? Just wondering. See also http://forum.pimatic.org/topic/60/solved-europe-supplies-rs-200-receiver

Hi,
yes sure. Have a look here:
http://forum.pimatic.org/topic/825/rs-200-switches-switch12-not-responding

br
Michael

Hello Michael
I have this RF-Switches they are cheap and works verry well.
http://www.pollin.de/shop/dt/MzMzOTQ0OTk-/Haustechnik/Funkschaltsysteme/Funksteckdosen_Set_mit_3_Steckdosen.html

Regards Andre

@merphun OK, I see. I thought you’d already fixed it. See also my comment on the other thread

Hey, any news to this?
I got a Conrad Dimmer, but I can’t set it’s state…

With pilight, I send: -p conrad_rsl_switch -i 1 -u 1 -t or -f to use it. Meanwhile, I try to debug (sniff) it with pimatic homeduino and I get id 30454 switch11 unit 0, but if I add this device to my favourites and switch it, pimatic stops working and I have to restart it.

@TehEbil said:

but if I add this device to my favourites and switch it, pimatic stops working and I have to restart it

This must be a problem with your configuration. Can you please post the device configuration you tried for the dimmer?

Sure:

{
  "id": "LichtSwitch2",
  "name": "LichtSwitch2",
  "class": "HomeduinoRFSwitch",
  "protocols": [
    {
      "name": "switch11",
      "options": {
        "id": 30545,
        "unit": 0
      }
    }
  ]
},
{
  "id": "rfswi312312tch",
  "name": "Dimmer",
  "class": "HomeduinoRFDimmer",
  "protocols": [
    {
      "name": "dimmer1",
      "options": {
        "id": 30545,
        "unit": 0
      }
    }
  ]
},
{
  "id": "LichtSwitch",
  "name": "LichtSwitch",
  "class": "HomeduinoRFSwitch",
  "protocols": [
    {
      "name": "switch11",
      "options": {
        "id": 111011011110110,
        "unit": 0
      }
    }
  ]
}

Tried it these ways. dimmer1 does nothing, propably wrong protocol… (will it turn off the device when value=0? tbh: I cannot test dimmability atm, because, an electrican guy will install it these days, it just got power now without being connected to the lamp, so I can turn the device itself on and off without seeing light ^^) Both switch11 leads to a website being hanged up.

*bumping

First you have to use pilight-recieve to get remote id (device) then your config should look like:

“devices”: {
“swiatlo_moj_pokoj”: {
“protocol”: [ “conrad_rsl_switch” ],
“id”: [{
“id”: 1,
“unit”: 1,
“device”: 23814
}],
“state”: “on”
},

http://forum.pilight.org/Thread-Fully-Supported-Conrad-RSL-Switch?page=1

Code in pilight is a litle buggy you can contact Michal Mydlarz muu@o2.pl for new code that works better.