[Solved] Europe supplies RS-200 receiver

---

I have some old RS200’s lying around.

On (1)

debug [pimatic-homeduino]: received: [ 564, 1307, 3237, 51535 ] 12021212121212121212021212121212121212121203
debug [pimatic-homeduino]: data: "RF receive 1307 3237 564 51535 0 0 0 0 01210101010101010101210101010101010101010123"

Off (1)

debug [pimatic-homeduino]: received: [ 558, 1318, 3229, 41316 ] 12021212121212121212021212120202121202021203
debug [pimatic-homeduino]: data: "RF receive 1318 3229 558 41316 0 0 0 0 01210101010101010101210101012121010121210123"

On(2)

debug [pimatic-homeduino]: received: [ 558, 1314, 3233, 51635 ] 12021212121212121212121212021212121202120213
debug [pimatic-homeduino]: data: "RF receive 1314 3233 558 51635 0 0 0 0 01210101010101010101010101210101010121012103"

Off (2)

debug [pimatic-homeduino]: received: [ 524, 1273, 3272, 42706 ] 12021212121212121212021212021202121212020213
debug [pimatic-homeduino]: data: "RF receive 1273 3272 524 42706 0 0 0 0 01210101010101010101210101210121010101212103"

Can you change the id or channel? Need more information for a protocol

these are 2 different channels. Here a third one: I can’t give you more. If its not enough then no problem.

On:

debug [pimatic-homeduino]: received: [ 562, 1313, 3234, 52149 ] 12021212121212121212121202121212121202120203
debug [pimatic-homeduino]: data: "RF receive 1313 3234 562 52149 0 0 0 0 01210101010101010101010121010101010121012123"

Off:

debug [pimatic-homeduino]: received: [ 567, 1306, 3228, 52097 ] 12021212121212121212021202121202121212020203
debug [pimatic-homeduino]: data: "RF receive 1306 3228 567 52097 0 0 0 0 01210101010101010101210121010121010101212123"

Ok i have done some work there.

first we map the data with the following patterns

12 -> 1
02 -> 0

your date are the this

12021212121212121212021212121212121212121203 on1
12021212121212121212021212120202121202021203 off1
12021212121212121212121212021212121202120213 on2
12021212121212121212021212021202121212020213 off2
12021212121212121212121202121212121202120203 on3
12021212121212121212021202121202121212020203 off3

mapped

1011111111011111111110 on1
1011111111011100110010 off1
1011111111111011110101 on2
1011111111011010111001 off2
1011111111110111110100 on3
1011111111010110111000 off3

In this data we can see some interressting patterns

    ID         ??   State  Channel
1011111111-011111111---1---10 on1
1011111111-011100110---0---10 off1
1011111111-111011110---1---01 on2
1011111111-011010111---0---01 off2
1011111111-110111110---1---00 on3
1011111111-010110111---0---00 off3

With these information we can create a protocol. But with only one source it can be possible that some interpretions are wrong. When later some other people gives more information for this protocol i would be changed.

Cool, nice to see how it works. Thank you. I have a arduino now with a receiver. So you could get the DRU heater also working?

https://github.com/pimatic/rfcontroljs/issues/29

Can you please test this.

https://github.com/Icesory/rfcontroljs/commit/8f9abd5ae8074708639c24218bb5601f97098a09

The problem is the unknown part in the middle. Eventually it will work but i think we need one more remote.

I have changed the protocol name to switch12.
Xento had developed a other protocol with the name switch10 and he was earlier.

Can’t test it right now, i’m on vacation. I will test it when i’m back home.

Sorry to be so late but id doesn’t work. pimatic doesn’t decode at all.

A little bit more information about what is working and what not where use full.

I have pushed a fix for this protocol.
Can you test it?
You must only replace the switch12.js file

@Icesory
Don’t know whats going wrong but. I receive this with the on button:

23:30:35.693 [pimatic-homeduino] debug: data: "RF receive 1315 3241 576 34916 0 0 0 0 0121210101210101010101010101210101010101010101010123"
23:30:35.699 [pimatic-homeduino] debug: received: [ 576, 1315, 3241, 34916 ] 1202021212021212121212121212021212121212121212121203
23:30:36.276 [pimatic-homeduino] debug: data: "RF receive 1316 3240 576 33932 0 0 0 0 0121210101210101010101010101210101010101010101010123"
23:30:36.284 [pimatic-homeduino] debug: received: [ 576, 1316, 3240, 33932 ] 1202021212021212121212121212021212121212121212121203

Now it is a complete different protocol!
That is not good

Can you please capture all buttons?

Wow, this is strange?

1 - ON
RF receive 1314 3238 576 34888 0 0 0 0 0121210101210101010101010101210101010101010101010123
received: [ 576, 1314, 3238, 34888 ] 1202021212021212121212121212021212121212121212121203

1 - OFF
RF receive 1315 3237 570 33656 0 0 0 0 0121210101210101010101010101010101010121010121210123
received: [ 570, 1315, 3237, 33656 ] 1202021212021212121212121212121212121202121202021203

2 - ON
RF receive 1315 3239 572 34992 0 0 0 0 0121210101210101010101010101010101210101010121012103
received: [ 572, 1315, 3239, 34992 ] 1202021212021212121212121212121212021212121202120213

2 - OFF
RF receive 1316 3237 568 35476 0 0 0 0 0121210101210101010101010101210101210121010101212103
received: [ 568, 1316, 3237, 35476 ] 1202021212021212121212121212021212021202121212020213

3 - ON

receive 1315 3238 567 34488 0 0 0 0 0121210101210101010101010101010121010101010121012123
received: [ 567, 1315, 3238, 34488 ] 1202021212021212121212121212121202121212121202120203

3 - OFF
RF receive 1317 3236 568 35496 0 0 0 0 0121210101210101010101010101210121010121010101212123
received: [ 568, 1317, 3236, 35496 ] 1202021212021212121212121212021202121202121212020203

I’m sorry that this happens, I really don’t know what this is, i have no other remotes lying around so it can’t be a different one.

I have pushed a fix again. can you test it?
https://github.com/pimatic/rfcontroljs/tree/development

Its working

00:38:52.276 [pimatic-homeduino] debug: data: "RF receive 1315 3238 569 35468 0 0 0 0 0121210101210101010101010101010121010101010121012123"
00:38:52.285 [pimatic-homeduino] debug: received: [ 569, 1315, 3238, 35468 ] 1202021212021212121212121212121202121212121202120203
00:38:52.288 [pimatic-homeduino] debug: switch12:  { id: 9983, unit: 1, state: true }

And sending?
For your Button 1 (unit 3) the message is not 100% right created.
Please try all buttons with sending.

this one is working: id: 9983, unit: 1,

Don’t know about the rest, will try the rest tomorrow morning.

Only id: 9983, unit: 1, is working

this not:

id: 9983, unit: 0
id: 9983, unit: 2
id: 9983, unit: 3