USB webcam livestream

---

pi@Terrarium ~ $ lsmod
Module                  Size  Used by
snd_bcm2835            21342  0
evdev                  11000  1
snd_usb_audio         128150  0
snd_hwdep               6545  1 snd_usb_audio
snd_usbmidi_lib        22236  1 snd_usb_audio
snd_seq_midi            5037  0
snd_seq_midi_event      7831  1 snd_seq_midi
snd_rawmidi            23955  2 snd_usbmidi_lib,snd_seq_midi
snd_pcm                93100  2 snd_bcm2835,snd_usb_audio
snd_seq                61097  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device          7209  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              23007  2 snd_pcm,snd_seq
uvcvideo               74778  1
videobuf2_vmalloc       3360  1 uvcvideo
videobuf2_memops        2361  1 videobuf2_vmalloc
videobuf2_core         41981  1 uvcvideo
v4l2_common             8285  1 videobuf2_core
i2c_bcm2708             6200  0
snd                    67211  9 snd_bcm2835,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_usbmidi_lib,snd_seq_device
videodev              154352  4 uvcvideo,v4l2_common,videobuf2_core
media                  16088  2 uvcvideo,videodev
uio_pdrv_genirq         3666  0
uio                     9897  1 uio_pdrv_genirq

Problem with your DHT22 sensor is maybe from upgrade to last raspbian ?
See this: http://forum.pimatic.org/topic/55/solved-ds1820-no-dir-in-w1-devices

@DDNRN and @Yves911
Strange:
After I have added the settings mentioned by DDNRN and set of a sudo reboot, shortly before the shutdown, I got some data:

After the reboot, again no data

Now, I’m totally confused?!?
All of a sudden, i get data from my sensors?!

Is there a logfile, I can check for the causes?

I have no idea about your reason on this but when I had DHTxx on my pi (before the change to arduino) sometimes it took about 10 min. after restart until I got some/valid data from the sensor.

@Gargoyle i think your 1wire wasn’t loaded, and also @DDNRN pointed you to the right direction.
Is it working now after each reboot (i can’t test myself because my DHT22 is connected to the homeduino)

D’OH!

It’s motion…

As soon as I stop it with sudo service motion stop, I get my data…

@Yves911 Are there any longer cables for the raspicam? It has to be about 2 meters for my use in my terrarium…

@Gargoyle i don’t think that such long cable exist (i think the longest one i saw was 50 cm max)

So, for another Raspberry… Here we go…

@Gargoyle said:

@Yves911 Are there any longer cables for the raspicam? It has to be about 2 meters for my use in my terrarium…

Yes there are some long ones, just one look in Ebay!
http://www.ebay.de/itm/Raspberry-Pi-Kamera-Cam-Ribbon-Cable-Flex-Kabel-Flachbandkabel-150cm-1-5m-15Pin-/271769759225?pt=LH_DefaultDomain_77&hash=item3f46bd6df9

I’m not shure about 2m long cables but think i saw them a few month ago.

Edit: from same guy also 2m:
http://www.ebay.de/itm/Raspberry-Pi-Kamera-Modul-Ribbon-Cable-Flex-Kabel-Flachbandkabel-200cm-2m-15Pin-/271769759227?pt=LH_DefaultDomain_77&hash=item3f46bd6dfb