One thing regarding the sync. Today I asked for the current temp outdoor and I got the “adjusted temp” and the current temp. Then I made a refresh (pull down) in my Google Home app and all sensors get synced. Any idea for this. Next time when I see a gap between the values I will try to recreate the assistent main device. Maybe it will trigger GA to reread the sub devices… I thing this is somehow a problem in NORA.
-
New plugin pimatic-assistant
-
Hi, when an attribute like temperature changes the device will update the state towards Nora. You should see these update as debug info in the log.
When you go into a device in Google Home App, the state is also updated with the latest values. -
I tried it with the sensor in my bedroom where I currently have my office and let the temp increase. I can see the change of the temp in the debug output…
…but the temp in Gome Home is still 23°C as before.
It take maybe a while. But the outdoor temp seems to be not changed since the morning, because the “adjusted” temp was really low compared to the measured temp.
I remember to a previous version (i guess 0.2.2) you published, where I was not really able to change the thermostat temp (just for test), because it was immediately readjusted. Did you changed the behavior somehow in this regard?
-
I will give it a try…
EDIT: Yepp, looks better now. Will observe it the next time… Thx for your update!
BTW. Humidity works with NORA now as well in German
-
Short feedback: Temp sensors works fine now. No more sync problems!
The shutter stuff is working well as well, even I have a error message after each command.
-
It should be json. See the stdout from the picture above. I think the end of the line there is the problem
to_pos&roller_pos=100
… This needs to be fixed on my side.
But this can be handled from my side. Is your plugin looking for a pattern like “current_pos”? -
Okay. Its my turn!
-
Does Nora work for you guys in this moment? All my devices are down since some hours…
-
I am just using your plugin variant, but due to the Nora backend I asked for it. Hmm stange. I haven’t change anything there…
-
Did you check the info on your http://node-red-google-home.herokuapp.com?
Assume you already looked at the debug log and is the presence dot online? -
Yes, all my devices are there. I revoked the token and as well reconnected the service in the GH app. Still nothing.
-
Yes. I tried to check the debug output, but there is not pimatic-assistant entry.
-
Ok, then the plugin is not active. I’m using for test a slightly changed guard function (check the connection). I did’t publish yet, but just did -> version 0.2.6
It could be a connection problem and this change would help. -
@ortin said in New plugin pimatic-assistant:
Yes. I tried to check the debug output, but there is not pimatic-assistant entry.
The debug checking that way is not always working. I take a look at the daemon.log.
-
I have installed the update, but all devices are still offline. The plugin is and was shown as active in the plugin section always.
Really strange. As I said, I made some things today, but it was just some new variables and variable devices. Nothing what could affect the assistant plugin.
Unfortunately I made no snapshot of the system before the update 😕.