Re: Mumbi m-FS300 / Flamingo FA500S (without dip switches)
Well, i still got an old set of Mumbi FS-300 switches lying around here, but I simple don’t get how to get them running in pmatic. Can anybody explain how to?
Mumbi-Fs300 without dip-switches still not running
Re: Mumbi m-FS300 / Flamingo FA500S (without dip switches)
Well, i still got an old set of Mumbi FS-300 switches lying around here, but I simple don’t get how to get them running in pmatic. Can anybody explain how to?
you can use the raw switch for that! do you have the remote?
you need to capture the rf code and use these for the rawswitch then.
create a homeduinoRFswitch device and use the rawswitch protocol.
insert the pulse counts and then the rf code for on and off.
for example here’s a json code from another thread
{
"protocols": [
{
"name": "rawswitch",
"options": {
"pulseCount": 58,
"pulseLengths": [
"380",
"988",
"5048"
],
"pulsesOn": "0101100101100101101001100101010101100110011010101001011002",
"pulsesOff": "0101100101100101011001100101010110101001011001101010011002"
},
"send": true,
"receive": true,
"rfrepeats": 7
}
],
"id": "licht",
"name": "Licht",
"class": "HomeduinoRFSwitch"
},
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
Well, that did the trick
I remember I tried that a year ago or so and it did’nt work, now it does.
Thank you
very nice to hear
then have fun with the mumbis
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
hi @leader21,
I got this output for “on”:
and that for the “off” signal of the A-channel of the remote:
which value I should take for which value in the rawswitch config? can you help me with this matter?
thank you very very much! kai
Take digits from the first row, this should work
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
@leader21 thanks! I will try. And for the pulse count value?
Count the digits in the first row after the brackets. Are these 66? I tried to count these on my mobile but am not sure if I got them all
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
Since i also had a set of Flamingo FA500R RF switches lying around and noticed this post, it helped me getting this set working as well.
However, if you try to make the device in the GUI it produces this:
"pulseLengths": {
"328": "",
"976": "",
"4952": ""
},
where it should be producing this:
"pulseLengths": [
"328",
"976",
"4952"
],
Did i discover a bug?
Seems to be a bug! Thx for reporting!
Created bug report under pimatic/pimatic#1090
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !