Hi guys!
I have set up a serial gateway for MySensors and built a DHT Tempsensor but I am stuck finding out the right node id and sensor id.
Could some explain how to get the IDs from the log beneath?
17:49:19.721 [pimatic-mysensors] debug: <- I_LOG_MESSAGE 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
17:49:19.728 [pimatic-mysensors] debug: <- I_ID_REQUEST 255;255;3;0;3;
17:49:19.734 [pimatic-mysensors] debug: -> Sending 255;255;3;0;4;19
17:49:19.734 [pimatic-mysensors] debug:>
17:49:21.740 [pimatic-mysensors] debug: <- I_LOG_MESSAGE 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
17:49:21.746 [pimatic-mysensors] debug: <- I_ID_REQUEST 255;255;3;0;3;
17:49:21.752 [pimatic-mysensors] debug: -> Sending 255;255;3;0;4;20
17:49:21.752 [pimatic-mysensors] debug:>
17:49:23.753 [pimatic-mysensors] debug: <- I_LOG_MESSAGE 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
17:49:23.768 [pimatic-mysensors] debug: <- I_ID_REQUEST 255;255;3;0;3;
17:49:23.776 [pimatic-mysensors] debug: -> Sending 255;255;3;0;4;21
17:49:23.776 [pimatic-mysensors] debug:>
17:49:25.765 [pimatic-mysensors] debug: <- I_LOG_MESSAGE 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
17:49:25.796 [pimatic-mysensors] debug: <- I_ID_REQUEST 255;255;3;0;3;
17:49:25.819 [pimatic-mysensors] debug: -> Sending 255;255;3;0;4;22
17:49:25.819 [pimatic-mysensors] debug:>
17:49:27.777 [pimatic-mysensors] debug: <- I_LOG_MESSAGE 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
17:49:27.784 [pimatic-mysensors] debug: <- I_ID_REQUEST 255;255;3;0;3;
17:49:27.790 [pimatic-mysensors] debug: -> Sending 255;255;3;0;4;23
17:49:27.790 [pimatic-mysensors] debug:>
Thanks in advance!
Luke