Hi @ all,
I’ve got a problem switching on two HE800S Switches.
This is the debug output when I turn on the first switch with remote control:
14:11:55 debug [pimatic-homeduino]: contact1: { id: 190912, all: false, contact: false, unit: 1 }
14:11:55 debug [pimatic-homeduino]: pir5: { id: 190912, all: false, presence: true, unit: 1 }
14:11:55 debug [pimatic-homeduino]: switch1: { id: 190912, all: false, state: true, unit: 1 }
14:11:55 debug [pimatic-homeduino]: received: [ 204, 332, 1408, 2772, 10884 ] 030102010201020102010201020102010202010102020102010201010202010102010202010201020101020102010201020102010201020201010201020102020104
14:11:55 debug [pimatic-homeduino]: data: "RF receive 204 2772 332 1408 10884 0 0 0 010203020302030203020302030203020303020203030203020302020303020203020303020302030202030203020302030203020302030302020302030203030204"
14:11:55 debug [pimatic-homeduino]: received: [ 232, 428, 976, 5028 ] 0202210202210221212102020221210221022121210221210221210203
I created this device in config.json:
{
"id": "Steckdose3",
"name": "Stehlampe Neu",
"class": "HomeduinoRFSwitch",
"protocols": [
{
"name": "switch1",
"options": {
"id": 190912,
"unit": 0
}
}
]
},
`
I’m not able to switch on the unit with pimatic.
Switching on the unit with remote control works, and even turns on my switch in the pimatic gui…
I’ve got other switches which use the switch4 protocol, they work without problems.
Using pimatic v0.8.
Any ideas?