New plugin for Milight - pimatic-milight-reloaded
I have two milight controllers. One old one with four LED stripes. One per zone. And one new one with three configured zones with bulbs.
After a restart of pimatic all milight devices are turned on with 100% brightness. The stripes have the configured color but the wrong dim level. The bulbs have the initial color (the color you get after pairing) and also 100% brightness.
The log file says nothing.
@saxnpaule said in New plugin for Milight - pimatic-milight-reloaded:
That won’t solve the problem with the different colors and also would change the previously defined dim level.
That’s right but the color is second for me is priority that the leds are off
I think I have covered the case where light are switched on on restart with release pimatic-milight-reloaded@0.9.17
I still cannot reproduce the case where color changes on startup. I only get this if there are multiple MilightRGBWZone devices for the same zone (or zone 0)
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
@mwittig the restart bug is fixxed! thanks thats christmas 
For me it’s not completely fixed.
For the new bridge (iBox2) everything is fine now, but for my old one the error still exists. All four zones are turned on at pimatic startup.
Hi,
I have miligth working with the ibox2 in combination with the 6W RGB CCT bulbs.
I have installed the plugin in pimatic, and with the V6 Full Color light i can control the Bulb.
So thats perfect.
But how can i set the bulb to 2700K. When I switch it on and off it always goes to 6500K.
Thnks in advance
@driek said in New plugin for Milight - pimatic-milight-reloaded:
But how can i set the bulb to 2700K. When I switch it on and off it always goes to 6500K.
Sorry for the delay in reply. Color temperature is currently not supported by pimatic-milight-reloaded for full color bulbs. Currently, I am very busy and cannot give an indication about when I can add this feature.
As color temperature is not explicitly by the plugin I am wondering why the color temperature is changing at all. Maybe it is a side effect of switching the bulb to white mode. If so, there is not much I can do about this without implementing the full control of the color temperature.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
@mwittig I think it is coming because im controlling it to 2700k with the original miligth app. But when i use pimatic it turns to 6500k.
1 more question, which device should i choose to control the fut035, it is the RGB+CCT ledstrip controller.
Or can i better choose another controller for controlling a WW or CW led strip?
