New plugin for Milight - pimatic-milight-reloaded

---

Hello community,
I have the old V4 Wifi Bridge running with some LED Stripe controllers. Does this old bridge support the Milight bulbs like the E14 one from this auction: modDzvouEhHB5UVqK7U5ElQ" target="_blank" rel="noopener noreferrer nofollow">http://www.ebay.de/itm/RGBW-W-WW-E27-GU10-E14-9W-LED-Light-Dimmable-RGB-Bulb-Lamp-2-4G-Wireless-Milight/291892216966?epid=1081815887&hash=item43f621c486modDzvouEhHB5UVqK7U5ElQ

If not, which wifi box supports both (stripes and bulbs) and is better supported by pimatic milight reloaded?

@SaxnPaule said in New plugin for Milight - pimatic-milight-reloaded:

Does this old bridge support the Milight bulbs like the E14 one from this auction

I haven’t tried the E14 ones, but the E27 6W RGBWW work for me with the V4 controller. E27 9W RGBWW should also work according to what other users reported earlier.

Thank you. I’ll report when my bulbs arrive.

@mwittig said in New plugin for Milight - pimatic-milight-reloaded:

@SaxnPaule said in New plugin for Milight - pimatic-milight-reloaded:

Does this old bridge support the Milight bulbs like the E14 one from this auction

I haven’t tried the E14 ones, but the E27 6W RGBWW work for me with the V4 controller. E27 9W RGBWW should also work according to what other users reported earlier.

What is with the issue from me and Gratizz ? Can u fixx that?

My five E14 RGBWW bulbs arrived. One could not be linked

In pimatic the only class that works is the “Milight V6 Full Color Zone”.

It would be great, if there is also the possibility to set the color to white and only adjust brightness and color temperature. Should I test another config for you @mwittig ?
Exactly that is what I need:

• Implemented actions to control color temperature and brightness for MilightWWCWZone

At the moment I use them with the iBox2 V6 bridge, because all 4 zones of the V4 bridge are in use.

Is it also possible to control the wifibox with the built-in light? Of only the zones?

@rob-jager said in New plugin for Milight - pimatic-milight-reloaded:

Is it also possible to control the wifibox with the built-in light? Of only the zones?

Yes, it is supported. That’s the iBox 1 wifi controller. The device type is MilightBridgeLight

@mwittig is there something wrong with my configuration or is the CWWW zone not supported by RGBWW bulbs? See post above.

Hallo,
ich schreibe erstmal in Deutsch da ich so mein Problem besser beschreiben kann.
Vor ~2 Monaten habe ich hier in dem Thread bereits geschrieben das ich einen Fehler habe "Cannot read property “toString” of undefined.
Jetzt wird es immer schlimmer, früher konnte ich 1-2 Restarts von Pi machen und ich hatte wieder 1-2 Tage ruhe, jetzt kann ich Gefühlt alle 3 Std einen restart machen da dann wieder die Meldung kommt.
Früher hatte ich diese Probleme nicht, liegt es an der Software? Oder gibt langsam aber sicher die Bridge den geist auf?
Da ich ansonsten super zufrieden bin mit milight wäre es echt schön wenn man dem Fehler abstellen könnte.

Hello,
The first part is in German because I can describe the problem better.
As already written 2 months ago, the problems with the “Can not read property” toString "of undefined is getting worse.
Is the fault on the software or is the hardware defective?

greetz wuschel

@wuschel i guess an issue on github containing the log file with this error would be good.

@michbeck100 said in New plugin for Milight - pimatic-milight-reloaded:

i guess an issue on github containing the log file with this error would be good.

i have the log …

https://pastebin.com/qpB3tNTz

the issue on github
https://github.com/mwittig/pimatic-milight-reloaded/issues/19

@wuschel I have the same issue… do no like it and a bit annoying

@gratizzz with the new update the bug with “toString” is not fixxed! I tested and think great but after 5 min the Error pops up

The bug after a restart the LED gos to 100% is not fixxed!

@mwittig can we help u to fixx the problems ?

@wuschel said in New plugin for Milight - pimatic-milight-reloaded:

can we help u to fixx the problems ?

Please test with pimatic-milight-reloaded@0.9.16.
If the problem remains, please run the plugin in debug mode and post bedug output to pastebin or alike

@mwittig said in New plugin for Milight - pimatic-milight-reloaded:

@wuschel said in New plugin for Milight - pimatic-milight-reloaded:

can we help u to fixx the problems ?

Please test with pimatic-milight-reloaded@0.9.16.
If the problem remains, please run the plugin in debug mode and post bedug output to pastebin or alike

The bug “toString” is fixxed! Thanks a lot

The bug after restart is not fixxed but a rule after systemstart “fixxed” that

Really? What does your rule? I have 7 Milight devices that were turned on after restart. The stripes at 100% with correct color, the bulbs with 100% but with random color. Some white some blue.

The rule needs to know the states of all devices. How to handle this?

i think “when pimatic startet after 10s dim led tisch to 0%”

That won’t solve the problem with the different colors and also would change the previously defined dim level.

I can’t reproduce this bug under normal conditions. I only get this if there are multiple MilightRGBWZone devices for the same zone (or zone 0)