I’ve managed to find out the different unitcode’s for up / down / stop.
Seems to work “sometimes”, means after the first rf-send, pimatic don’t send another signal for a while. I think it could be a performance issue because I’m not using an arduiono at the moment. Driver is “gpio”. After a while, I can successfully trigger another command for the shutter.
Here’s my config:
{
"id": "rf-shutter-buttons",
"name": "Leinwand",
"class": "HomeduinoRFButtonsDevice",
"buttons": [
{
"id": "shutter-down-button",
"text": "▼",
"protocols": [
{
"name": "switch14",
"options": {
"unit": 2,
"id": 845056,
"all": true,
"state": false
}
}
]
},
{
"id": "shutter-stop-button",
"text": "◄►",
"protocols": [
{
"name": "switch14",
"options": {
"unit": 3,
"id": 845056,
"all": true,
"state": false
}
}
]
},
{
"id": "shutter-up-button",
"text": "▲",
"protocols": [
{
"name": "switch14",
"options": {
"unit": 4,
"id": 845056,
"all": false,
"state": false
}
}
]
}
]
}
regards