• C
    countjuh

    i tried some things, can’t seem to manage the append function in pimatic at all. dont have a clue where to begin here.

    posted in Troubleshooting read more
  • C
    countjuh

    @Gleno0h You were totally right here! i soldered pin25 and pin26 together. it works! i have sudo reboot the raspberry and now its working all fine. i have rebuild the config back to /dev/arduino for it worked awesome cause it doesnt matter if the arduino comes up with usb0 or usb1.
    Thanks all for thinking with me on this issue. for people who have this problem, here is also a link for this ‘bug’

    https://ketturi.kapsi.fi/2014/04/how-to-fix-moody-arduino-nano/

    posted in Hardware read more
  • C
    countjuh

    i think it is port 0. cause i get this result in putty:

    pi@raspberrypi:~ $ ls -l /dev/serial/by-path
    total 0
    lrwxrwxrwx 1 root root 13 May 27 19:53 platform-3f980000.usb-usb-0:1.3:1.0-port0 -> …/…/ttyUSB0

    i have tried to change it to this. Result now after sudo reboot is:
    error [pimatic-homeduino]: Error: Cannot open /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0
    at Error (native)
    07:29:24error [pimatic-homeduino]: Couldn’t connect to homeduino device: Cannot open /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0.

    I also digged into google and tried sudo apt get update and upgrade. also didnt work. So after powerloss or sudo reboot the usb cable needs unplugging to make it work again. Can it maybe be the USB cable that causes this problem?

    posted in Hardware read more
  • C
    countjuh

    thanks all for the replies. i allready tried the thing from you t1m0. Just in case i tried it again. Sudo reboot raspberry results in a loss of usb again:

    error [pimatic-homeduino]: Error: Cannot open /dev/serial/by-path/platform-3f980000.usb-usb-0:1.2:1.0-port0
    at Error (native)

    posted in Hardware read more
  • C
    countjuh

    And no, i only have the arduino in the USB.

    posted in Hardware read more
  • C
    countjuh

    Thanks for the reply. I have tried the things described. But it doesnt work for me. the config is now /dev/arduino
    That works amazing, cause now i dont have the problem regarding USB0 or USB1 anymore. But when i do a sudo reboot it seems that the raspberry doesnt see the USB ports anymore. only thing is still to unplug the USB cable and plug it back in.

    posted in Hardware read more
  • C
    countjuh

    Good day everyone. I have the following problem / annoyment :)
    When the raspberry restarts ( with sudo reboot ), but i am thinking after a electrical problem which will restart the raspberry, the Arduino nano isnt available anymore on ttyUSB0. The only thing what helps is to plug out the USB cable and plug it back in. Sometimes it will come up with ttyUSB1 which is the wrong for Pimatic. After a retry it will come up on ttyUSB0. Ideas?

    posted in Hardware read more
  • C
    countjuh

    OK, today was the day. The above line worked. My irrigation went on @ 7.00.
    SO i can defo say that this rule is working correct.

    posted in Rules and Scripts read more
  • C
    countjuh

    ok, sry, im from the netherlands. Good luck with the sale.

    posted in Marketplace read more

Looks like your connection to pimatic forum was lost, please wait while we try to reconnect.