Llap data over serial?

---

hi all, first let me say thank you for the great work so, far!
I was wondering how can start using your app for my 2 weather stations and few relays I have.

I am using this board: Www.sparkfun.com/products/retired/10586
Weather boards documentation: http://cdn.sparkfun.com/datasheets/Sensors/Weather/USB_Weather_Board_V3_datasheet_110615.pdf
And ciseco xrf radios: http://openmicros.org/index.php/articles/247-xrf-document-index

My end goal is to be able to transmit data from both weather boards to pimatic/pi wirelessly over serial (/dev/ttyAMA0). Then be able to turn on/off switches based on the weather boards reading like humidity, temp, rain…

Any information regarding this will be very helpful!
Many thanks.

welcome to pimatic
regarding your relais you could have a look at www.mysensors.org
there’s a plugin for mysensors available.

your weather device … how do you read the data at the moment?

Hi @leader21 thanks for the reply,
At the moment all data is collected wirelessly (Serial using Ciseco XRF Modules) using a small Python script that stores readings from both stations to a mongodb. i hope this help clear thing out.

Thanks

well i don’t know much about database design but maybe you are able to write a simple logfile and extract the wanted data with the pimatic logreader device.
could be a possible way.

if this works and your relais are connected to pimatic via mysensors you can evolve rules like “if $temp.value > 23 THEN switch on relais1 for 10 minutes” or something similar

someone else with a good / better solution?