I’m using generic-rfbox with nearly original sketch “rfbox-ds18b20-multi.ino” from examples.
rfbox source https://github.com/incmve/generic-rfbox
Running on an nano placed on a breadborad for testing since ~ 2 weeks now very stable. I use the cheap China-transmitter and -receiver but made a better antenna working for about 10m distance.
In the sketch I modified the call for DS18B20 to use all connected sensors found from generic-rfbox while running.
So in the moment I use 2 temp sensors for In/Out - Temperature.
Later i will increase to about 6 temp-sensors to log my heating system in the cellar.
This is my config, running from the first attempt.
"devices": [
{
"id": "hd-1001-gen-temp",
"name": "HDRF-1001-Temperatur",
"class": "HomeduinoRFGenericSensor",
"protocols": [
{
"name": "generic",
"options": {
"id": 1001
}
}
],
"attributes": [
{
"name": "temp-1",
"type": 1,
"decimals": 2,
"baseValue": 0,
"unit": "°C",
"label": "Temp 1"
},
{
"name": "temp-2",
"type": 2,
"decimals": 2,
"baseValue": 0,
"unit": "°C",
"label": "Temp 2"
}
]
},