is there anyone using Nuki dooropener

---

Perfect for me 👌

Works for me, too. Well done and great work @bertreb, thanks!

Hello again,
now the nuki reloaded version 0.9.20 is installed. I think the reason was the old version of node, updated to 10.14.

Now I am able to install a device, but there no real connection.
I got messages in log files,

I would send them to you but - I do not know how I can implement such a black window with the informations inside. Sorry, but I’m a newbie.
Ifyou can explain it I will send my log immediately.

use ``` before and after the code you want to publish

14:08:38.603 [pimatic-nuki-reloaded] debug: Error initializing callbackRequestError: connect ECONNREFUSED 192.168
.178.84:8080
14:08:44.433 [pimatic-nuki-reloaded] error: Error _requestUpdate: ECONNREFUSED
14:08:59.732 [pimatic-nuki-reloaded] debug: ActionHandler, action received: 2
14:09:04.723 [pimatic-nuki-reloaded] debug: Error locking 'hausture': {
14:09:04.723 [pimatic-nuki-reloaded] debug:>  "name": "RequestError",
14:09:04.723 [pimatic-nuki-reloaded] debug:>  "code": "ECONNREFUSED",
14:09:04.723 [pimatic-nuki-reloaded] debug:>  "timings": {
14:09:04.723 [pimatic-nuki-reloaded] debug:>    "start": 1612962543990,
14:09:04.723 [pimatic-nuki-reloaded] debug:>    "socket": 1612962543991,
14:09:04.723 [pimatic-nuki-reloaded] debug:>    "error": 1612962544717,
14:09:04.723 [pimatic-nuki-reloaded] debug:>    "phases": {
14:09:04.723 [pimatic-nuki-reloaded] debug:>      "wait": 1,
14:09:04.723 [pimatic-nuki-reloaded] debug:>      "total": 727
14:09:04.723 [pimatic-nuki-reloaded] debug:>    }
14:09:04.723 [pimatic-nuki-reloaded] debug:>  }
14:09:04.723 [pimatic-nuki-reloaded] debug:>}

like this???

you get the blackbox with ``` 3 times the ‘reversed single quotation mark’

ok. I will try it. But these loginformation are actual.

The error says that your Nuki bridge can’t be reached.
Is the Bridge ip 192.168.178.84 with port 8080?

yes, it is. but I will look for it, perhaps there is no connection
I check it.

‘’‘14:41:00.357 [pimatic-nuki-reloaded] debug: ActionHandler, action received: 2
(node:32412) ExperimentalWarning: Readable[Symbol.asyncIterator] is an experimental feature. This feature could change at any time
14:41:13.751 [pimatic-nuki-reloaded] debug: ‘hausture’ locked ‘’’

Sorry, i do not find the right letter.
But the plugin works now, the response for lock and unlock is correct. Just only the percentage of battery is wrong, show 0%.

very good work of your side. Thanks.

14:41:00.357 [pimatic-nuki-reloaded] debug: ActionHandler, action >received: 2
(node:32412) ExperimentalWarning: Readable[Symbol.asyncIterator] is >an experimental feature. This feature could change at any time
14:41:13.751 [pimatic-nuki-reloaded] debug: 'hausture' locked

ok. I found a way.
But there are no more information in log. should there more?

If you could update to node 10.22 the experimentalWarning will be gone.
If you filter on pimatic-nuke-reloaded there should be more debug info, after a restart of pimatic.

The batteryLevel is requested from the bridge on startup and after that every 6 hours (default polling time).

To check what’s happening in your situation.

Can you do a manual request (via browser) and see what the response is?
The manual request is (with your ip:port)

http://192.168.178.84:8080/list?token=<your token>

Just cut and paste the response you see in the browser (in a blackbox)

This way I can check how the batteryLevel is formatted

‘’’[{“nukiId”:487xxxxxxxx"name":“home”,“lastKnownState”:{“state”:3,“stateName”:“unlocked”,“batteryCritical”:false,“timestamp”:“2021-02-10T14:58:06+01:00”}}]’’’

Here is the answer from the bridge, but there is no value for battery in.
I wrote from my mobile, so again I did not find the right signs for the blackbox.

Thanks, the batteryLevel is missing in your Nuki system.
It could be a software version of the bridge and/or the lock or a functionality thats missing in the type you use.
Is your Nuki app telling you the battery level?

May I ask you also to questions about pimatic in a docker container?
If yes, I will start a new chat. But Attention, I started with docker 3 days ago.

Yes please a different topic or thread use

Yes, I can see the battery status with 100%

Could your Nuki bridge need a software update?

Firmware is 2.9.10, no newer firmware available.