Ahh ok, Yes for sure all my motors do have programmed end positions.
So I don’t have to fear any damages.
Is someone driving such stuff without? - that would be to dangerous from my point of view.
Release pimatic-raspbee@0.1.6
Ahh ok, Yes for sure all my motors do have programmed end positions.
So I don’t have to fear any damages.
Is someone driving such stuff without? - that would be to dangerous from my point of view.
… the things I’m using here should be more secure than my avatar
I made an update for the cover gui. Please update the following files:
You need to set the rollingTime to the time of your shutter. Its default 20 seconds.
Hi, I guess I have to restart afterwards by: ‘sudo node_modules/pimatic/pimatic.js’, right?
@pedder said in Release pimatic-raspbee@0.1.6:
sudo node_modules/pimatic/pimatic.js
Wow, that works great!!!
All buttons now toggle the right button on the shutter switch.
But I’m a bit confused by the percentage open numbers.
From a neutral, stop, 50% position, pressing then ‘open’, the close button is then colored and the percentages are counting down from 50% to 0%, what I would assume would be percentage-wise a closed shutter!?
The other way, pressing ‘close’ from 'stop, 50%, it is exactly the other way round. Coloring the open button and couting the open status from 50% to 100%, which I would guess would be 100%!?
What I designed works as follows:
There are also commands sent to the shutter device.
There should be no 50% (=stop) anymore. At least in the gui part there’s no neutral/stop position anymore. Unless something like that is coming from the shutter device. But that is something i couldn’t test.
It would help me if you can post debug info
Ok, following your explanations, by sliding the slider from 50% (as the shutter switch resets after a while and then also moves the slider to 50%), to >50%-100%, it should toggle the ‘open’ button on the shutter switch, but it toggles the close button.
The other way round, from that ‘neutral’ position, sliding the slider to <50%-0%, it correctly toggles the close button.
Thus, I assume the first case is not correct, isn’t it?
… I will try to fetch some debug
ok, sorry it takes a couple of minutes to let the shutter switch let reset himself to ‘neutral/stop’
This is now pressing the ‘open’ button on teh raspbee device and then waiting until the shutter switch resets itself and by this also resets the button on the raspbee device to ‘stop’ and the dimmer to 50%
21:17:35.204 [pimatic-raspbee] debug: new message received
21:17:35.207 [pimatic-raspbee] debug: { attr:
21:17:35.207 [pimatic-raspbee] debug:> { id: '3',
21:17:35.207 [pimatic-raspbee] debug:> lastannounced: null,
21:17:35.207 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:17Z',
21:17:35.207 [pimatic-raspbee] debug:> manufacturername: '_TYZB01_dazsid15',
21:17:35.207 [pimatic-raspbee] debug:> modelid: 'TS0302',
21:17:35.207 [pimatic-raspbee] debug:> name: 'Window covering device 1',
21:17:35.207 [pimatic-raspbee] debug:> powerup: 7,
21:17:35.207 [pimatic-raspbee] debug:> swversion: null,
21:17:35.207 [pimatic-raspbee] debug:> type: 'Window covering device',
21:17:35.207 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' },
21:17:35.207 [pimatic-raspbee] debug:> e: 'changed',
21:17:35.207 [pimatic-raspbee] debug:> id: '3',
21:17:35.207 [pimatic-raspbee] debug:> r: 'lights',
21:17:35.207 [pimatic-raspbee] debug:> t: 'event',
21:17:35.207 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' }
21:18:30.128 [pimatic-raspbee] debug: ChangeStateTo open
21:18:30.144 [pimatic-raspbee] debug: moveTo: 50, target: 100, _transitSeconds: 10, _positionStep: 5
21:18:30.147 [pimatic-raspbee] debug: updatePosition: 105
21:18:30.168 [pimatic-raspbee] debug: Position: 55
21:18:30.227 [pimatic-raspbee] debug: New value send to device Window covering device 1
21:18:30.232 [pimatic-raspbee] debug: { lift: 0 }
21:18:30.245 [pimatic-raspbee] debug: new message received
21:18:30.249 [pimatic-raspbee] debug: { e: 'changed',
21:18:30.249 [pimatic-raspbee] debug:> id: '3',
21:18:30.249 [pimatic-raspbee] debug:> r: 'lights',
21:18:30.249 [pimatic-raspbee] debug:> state:
21:18:30.249 [pimatic-raspbee] debug:> { bri: 254, lift: 100, on: true, open: false, reachable: true },
21:18:30.249 [pimatic-raspbee] debug:> t: 'event',
21:18:30.249 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' }
21:18:30.250 [pimatic-raspbee] debug: Received values: {
21:18:30.250 [pimatic-raspbee] debug:> "id": 3,
21:18:30.250 [pimatic-raspbee] debug:> "type": "event",
21:18:30.250 [pimatic-raspbee] debug:> "event": "changed",
21:18:30.250 [pimatic-raspbee] debug:> "resource": "lights",
21:18:30.250 [pimatic-raspbee] debug:> "state": {
21:18:30.250 [pimatic-raspbee] debug:> "bri": 254,
21:18:30.250 [pimatic-raspbee] debug:> "lift": 100,
21:18:30.250 [pimatic-raspbee] debug:> "on": true,
21:18:30.250 [pimatic-raspbee] debug:> "open": false,
21:18:30.250 [pimatic-raspbee] debug:> "reachable": true
21:18:30.250 [pimatic-raspbee] debug:> },
21:18:30.250 [pimatic-raspbee] debug:> "uniqueid": "ec:1b:bd:ff:fe:8f:10:92-01"
21:18:30.250 [pimatic-raspbee] debug:>}
21:18:30.253 [pimatic-raspbee] debug: moveTo: 55, target: 0, _transitSeconds: 11, _positionStep: -5
21:18:30.254 [pimatic-raspbee] debug: updatePosition: 95
21:18:30.264 [pimatic-raspbee] debug: Position: 50
21:18:31.270 [pimatic-raspbee] debug: updatePosition: 95
21:18:31.277 [pimatic-raspbee] debug: Position: 45
21:18:31.937 [pimatic-raspbee] debug: new message received
21:18:31.940 [pimatic-raspbee] debug: { attr:
21:18:31.940 [pimatic-raspbee] debug:> { id: '1',
21:18:31.940 [pimatic-raspbee] debug:> lastannounced: null,
21:18:31.940 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:18Z',
21:18:31.940 [pimatic-raspbee] debug:> manufacturername: 'dresden elektronik',
21:18:31.940 [pimatic-raspbee] debug:> modelid: 'ConBee II',
21:18:31.940 [pimatic-raspbee] debug:> name: 'Configuration tool 1',
21:18:31.940 [pimatic-raspbee] debug:> swversion: null,
21:18:31.940 [pimatic-raspbee] debug:> type: 'Configuration tool',
21:18:31.940 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' },
21:18:31.940 [pimatic-raspbee] debug:> e: 'changed',
21:18:31.940 [pimatic-raspbee] debug:> id: '1',
21:18:31.940 [pimatic-raspbee] debug:> r: 'lights',
21:18:31.940 [pimatic-raspbee] debug:> t: 'event',
21:18:31.940 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' }
21:18:32.284 [pimatic-raspbee] debug: updatePosition: 95
21:18:32.288 [pimatic-raspbee] debug: Position: 40
21:18:33.294 [pimatic-raspbee] debug: updatePosition: 95
21:18:33.298 [pimatic-raspbee] debug: Position: 35
21:18:34.304 [pimatic-raspbee] debug: updatePosition: 95
21:18:34.308 [pimatic-raspbee] debug: Position: 30
21:18:35.314 [pimatic-raspbee] debug: updatePosition: 95
21:18:35.318 [pimatic-raspbee] debug: Position: 25
21:18:36.206 [pimatic-raspbee] debug: new message received
21:18:36.218 [pimatic-raspbee] debug: { attr:
21:18:36.218 [pimatic-raspbee] debug:> { id: '3',
21:18:36.218 [pimatic-raspbee] debug:> lastannounced: null,
21:18:36.218 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:18Z',
21:18:36.218 [pimatic-raspbee] debug:> manufacturername: '_TYZB01_dazsid15',
21:18:36.218 [pimatic-raspbee] debug:> modelid: 'TS0302',
21:18:36.218 [pimatic-raspbee] debug:> name: 'Window covering device 1',
21:18:36.218 [pimatic-raspbee] debug:> powerup: 7,
21:18:36.218 [pimatic-raspbee] debug:> swversion: null,
21:18:36.218 [pimatic-raspbee] debug:> type: 'Window covering device',
21:18:36.218 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' },
21:18:36.218 [pimatic-raspbee] debug:> e: 'changed',
21:18:36.218 [pimatic-raspbee] debug:> id: '3',
21:18:36.218 [pimatic-raspbee] debug:> r: 'lights',
21:18:36.218 [pimatic-raspbee] debug:> t: 'event',
21:18:36.218 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' }
21:18:36.324 [pimatic-raspbee] debug: updatePosition: 95
21:18:36.330 [pimatic-raspbee] debug: Position: 20
21:18:37.337 [pimatic-raspbee] debug: updatePosition: 95
21:18:37.341 [pimatic-raspbee] debug: Position: 15
21:18:38.347 [pimatic-raspbee] debug: updatePosition: 95
21:18:38.351 [pimatic-raspbee] debug: Position: 10
21:18:39.357 [pimatic-raspbee] debug: updatePosition: 95
21:18:39.361 [pimatic-raspbee] debug: Position: 5
21:18:40.368 [pimatic-raspbee] debug: updatePosition: 95
21:18:40.375 [pimatic-raspbee] debug: Position: 0
21:19:30.848 [pimatic-raspbee] debug: new message received
21:19:30.853 [pimatic-raspbee] debug: { e: 'changed',
21:19:30.853 [pimatic-raspbee] debug:> id: '3',
21:19:30.853 [pimatic-raspbee] debug:> r: 'lights',
21:19:30.853 [pimatic-raspbee] debug:> state:
21:19:30.853 [pimatic-raspbee] debug:> { bri: 127, lift: 50, on: true, open: true, reachable: true },
21:19:30.853 [pimatic-raspbee] debug:> t: 'event',
21:19:30.853 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' }
21:19:30.855 [pimatic-raspbee] debug: Received values: {
21:19:30.855 [pimatic-raspbee] debug:> "id": 3,
21:19:30.855 [pimatic-raspbee] debug:> "type": "event",
21:19:30.855 [pimatic-raspbee] debug:> "event": "changed",
21:19:30.855 [pimatic-raspbee] debug:> "resource": "lights",
21:19:30.855 [pimatic-raspbee] debug:> "state": {
21:19:30.855 [pimatic-raspbee] debug:> "bri": 127,
21:19:30.855 [pimatic-raspbee] debug:> "lift": 50,
21:19:30.855 [pimatic-raspbee] debug:> "on": true,
21:19:30.855 [pimatic-raspbee] debug:> "open": true,
21:19:30.855 [pimatic-raspbee] debug:> "reachable": true
21:19:30.855 [pimatic-raspbee] debug:> },
21:19:30.855 [pimatic-raspbee] debug:> "uniqueid": "ec:1b:bd:ff:fe:8f:10:92-01"
21:19:30.855 [pimatic-raspbee] debug:>}
21:19:30.858 [pimatic-raspbee] debug: moveTo: 0, target: 50, _transitSeconds: 10, _positionStep: 5
21:19:30.861 [pimatic-raspbee] debug: updatePosition: 5
21:19:30.876 [pimatic-raspbee] debug: Position: 5
21:19:31.884 [pimatic-raspbee] debug: updatePosition: 5
21:19:31.890 [pimatic-raspbee] debug: Position: 10
21:19:32.898 [pimatic-raspbee] debug: updatePosition: 5
21:19:32.904 [pimatic-raspbee] debug: Position: 15
21:19:33.912 [pimatic-raspbee] debug: updatePosition: 5
21:19:33.916 [pimatic-raspbee] debug: Position: 20
hm, maybe there might has been something in the cash, which then came later into the log-file.
Without doing anything, now this is additionally in:
21:19:34.339 [pimatic-raspbee] debug: new message received
21:19:34.343 [pimatic-raspbee] debug: { attr:
21:19:34.343 [pimatic-raspbee] debug:> { id: '1',
21:19:34.343 [pimatic-raspbee] debug:> lastannounced: null,
21:19:34.343 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:19Z',
21:19:34.343 [pimatic-raspbee] debug:> manufacturername: 'dresden elektronik',
21:19:34.343 [pimatic-raspbee] debug:> modelid: 'ConBee II',
21:19:34.343 [pimatic-raspbee] debug:> name: 'Configuration tool 1',
21:19:34.343 [pimatic-raspbee] debug:> swversion: null,
21:19:34.343 [pimatic-raspbee] debug:> type: 'Configuration tool',
21:19:34.343 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' },
21:19:34.343 [pimatic-raspbee] debug:> e: 'changed',
21:19:34.343 [pimatic-raspbee] debug:> id: '1',
21:19:34.343 [pimatic-raspbee] debug:> r: 'lights',
21:19:34.343 [pimatic-raspbee] debug:> t: 'event',
21:19:34.343 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' }
21:19:34.922 [pimatic-raspbee] debug: updatePosition: 5
21:19:34.926 [pimatic-raspbee] debug: Position: 25
21:19:35.931 [pimatic-raspbee] debug: updatePosition: 5
21:19:35.936 [pimatic-raspbee] debug: Position: 30
21:19:36.207 [pimatic-raspbee] debug: new message received
21:19:36.211 [pimatic-raspbee] debug: { attr:
21:19:36.211 [pimatic-raspbee] debug:> { id: '3',
21:19:36.211 [pimatic-raspbee] debug:> lastannounced: null,
21:19:36.211 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:19Z',
21:19:36.211 [pimatic-raspbee] debug:> manufacturername: '_TYZB01_dazsid15',
21:19:36.211 [pimatic-raspbee] debug:> modelid: 'TS0302',
21:19:36.211 [pimatic-raspbee] debug:> name: 'Window covering device 1',
21:19:36.211 [pimatic-raspbee] debug:> powerup: 7,
21:19:36.211 [pimatic-raspbee] debug:> swversion: null,
21:19:36.211 [pimatic-raspbee] debug:> type: 'Window covering device',
21:19:36.211 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' },
21:19:36.211 [pimatic-raspbee] debug:> e: 'changed',
21:19:36.211 [pimatic-raspbee] debug:> id: '3',
21:19:36.211 [pimatic-raspbee] debug:> r: 'lights',
21:19:36.211 [pimatic-raspbee] debug:> t: 'event',
21:19:36.211 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' }
21:19:36.943 [pimatic-raspbee] debug: updatePosition: 5
21:19:36.948 [pimatic-raspbee] debug: Position: 35
21:19:37.956 [pimatic-raspbee] debug: updatePosition: 5
21:19:37.962 [pimatic-raspbee] debug: Position: 40
21:19:38.970 [pimatic-raspbee] debug: updatePosition: 5
21:19:38.974 [pimatic-raspbee] debug: Position: 45
21:19:39.979 [pimatic-raspbee] debug: updatePosition: 5
21:19:39.988 [pimatic-raspbee] debug: Position: 50
21:20:36.740 [pimatic-raspbee] debug: new message received
21:20:36.744 [pimatic-raspbee] debug: { attr:
21:20:36.744 [pimatic-raspbee] debug:> { id: '1',
21:20:36.744 [pimatic-raspbee] debug:> lastannounced: null,
21:20:36.744 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:20Z',
21:20:36.744 [pimatic-raspbee] debug:> manufacturername: 'dresden elektronik',
21:20:36.744 [pimatic-raspbee] debug:> modelid: 'ConBee II',
21:20:36.744 [pimatic-raspbee] debug:> name: 'Configuration tool 1',
21:20:36.744 [pimatic-raspbee] debug:> swversion: null,
21:20:36.744 [pimatic-raspbee] debug:> type: 'Configuration tool',
21:20:36.744 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' },
21:20:36.744 [pimatic-raspbee] debug:> e: 'changed',
21:20:36.744 [pimatic-raspbee] debug:> id: '1',
21:20:36.744 [pimatic-raspbee] debug:> r: 'lights',
21:20:36.744 [pimatic-raspbee] debug:> t: 'event',
21:20:36.744 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' }
21:20:37.212 [pimatic-raspbee] debug: new message received
21:20:37.220 [pimatic-raspbee] debug: { attr:
21:20:37.220 [pimatic-raspbee] debug:> { id: '3',
21:20:37.220 [pimatic-raspbee] debug:> lastannounced: null,
21:20:37.220 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:20Z',
21:20:37.220 [pimatic-raspbee] debug:> manufacturername: '_TYZB01_dazsid15',
21:20:37.220 [pimatic-raspbee] debug:> modelid: 'TS0302',
21:20:37.220 [pimatic-raspbee] debug:> name: 'Window covering device 1',
21:20:37.220 [pimatic-raspbee] debug:> powerup: 7,
21:20:37.220 [pimatic-raspbee] debug:> swversion: null,
21:20:37.220 [pimatic-raspbee] debug:> type: 'Window covering device',
21:20:37.220 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' },
21:20:37.220 [pimatic-raspbee] debug:> e: 'changed',
21:20:37.220 [pimatic-raspbee] debug:> id: '3',
21:20:37.220 [pimatic-raspbee] debug:> r: 'lights',
21:20:37.220 [pimatic-raspbee] debug:> t: 'event',
21:20:37.220 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' }
21:21:38.202 [pimatic-raspbee] debug: new message received
21:21:38.207 [pimatic-raspbee] debug: { attr:
21:21:38.207 [pimatic-raspbee] debug:> { id: '3',
21:21:38.207 [pimatic-raspbee] debug:> lastannounced: null,
21:21:38.207 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:21Z',
21:21:38.207 [pimatic-raspbee] debug:> manufacturername: '_TYZB01_dazsid15',
21:21:38.207 [pimatic-raspbee] debug:> modelid: 'TS0302',
21:21:38.207 [pimatic-raspbee] debug:> name: 'Window covering device 1',
21:21:38.207 [pimatic-raspbee] debug:> powerup: 7,
21:21:38.207 [pimatic-raspbee] debug:> swversion: null,
21:21:38.207 [pimatic-raspbee] debug:> type: 'Window covering device',
21:21:38.207 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' },
21:21:38.207 [pimatic-raspbee] debug:> e: 'changed',
21:21:38.207 [pimatic-raspbee] debug:> id: '3',
21:21:38.207 [pimatic-raspbee] debug:> r: 'lights',
21:21:38.207 [pimatic-raspbee] debug:> t: 'event',
21:21:38.207 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' }
21:21:39.139 [pimatic-raspbee] debug: new message received
21:21:39.145 [pimatic-raspbee] debug: { attr:
21:21:39.145 [pimatic-raspbee] debug:> { id: '1',
21:21:39.145 [pimatic-raspbee] debug:> lastannounced: null,
21:21:39.145 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:21Z',
21:21:39.145 [pimatic-raspbee] debug:> manufacturername: 'dresden elektronik',
21:21:39.145 [pimatic-raspbee] debug:> modelid: 'ConBee II',
21:21:39.145 [pimatic-raspbee] debug:> name: 'Configuration tool 1',
21:21:39.145 [pimatic-raspbee] debug:> swversion: null,
21:21:39.145 [pimatic-raspbee] debug:> type: 'Configuration tool',
21:21:39.145 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' },
21:21:39.145 [pimatic-raspbee] debug:> e: 'changed',
21:21:39.145 [pimatic-raspbee] debug:> id: '1',
21:21:39.145 [pimatic-raspbee] debug:> r: 'lights',
21:21:39.145 [pimatic-raspbee] debug:> t: 'event',
21:21:39.145 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' }
21:22:38.204 [pimatic-raspbee] debug: new message received
21:22:38.208 [pimatic-raspbee] debug: { attr:
21:22:38.208 [pimatic-raspbee] debug:> { id: '3',
21:22:38.208 [pimatic-raspbee] debug:> lastannounced: null,
21:22:38.208 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:22Z',
21:22:38.208 [pimatic-raspbee] debug:> manufacturername: '_TYZB01_dazsid15',
21:22:38.208 [pimatic-raspbee] debug:> modelid: 'TS0302',
21:22:38.208 [pimatic-raspbee] debug:> name: 'Window covering device 1',
21:22:38.208 [pimatic-raspbee] debug:> powerup: 7,
21:22:38.208 [pimatic-raspbee] debug:> swversion: null,
21:22:38.208 [pimatic-raspbee] debug:> type: 'Window covering device',
21:22:38.208 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' },
21:22:38.208 [pimatic-raspbee] debug:> e: 'changed',
21:22:38.208 [pimatic-raspbee] debug:> id: '3',
21:22:38.208 [pimatic-raspbee] debug:> r: 'lights',
21:22:38.208 [pimatic-raspbee] debug:> t: 'event',
21:22:38.208 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' }
21:22:41.540 [pimatic-raspbee] debug: new message received
21:22:41.546 [pimatic-raspbee] debug: { attr:
21:22:41.546 [pimatic-raspbee] debug:> { id: '1',
21:22:41.546 [pimatic-raspbee] debug:> lastannounced: null,
21:22:41.546 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:22Z',
21:22:41.546 [pimatic-raspbee] debug:> manufacturername: 'dresden elektronik',
21:22:41.546 [pimatic-raspbee] debug:> modelid: 'ConBee II',
21:22:41.546 [pimatic-raspbee] debug:> name: 'Configuration tool 1',
21:22:41.546 [pimatic-raspbee] debug:> swversion: null,
21:22:41.546 [pimatic-raspbee] debug:> type: 'Configuration tool',
21:22:41.546 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' },
21:22:41.546 [pimatic-raspbee] debug:> e: 'changed',
21:22:41.546 [pimatic-raspbee] debug:> id: '1',
21:22:41.546 [pimatic-raspbee] debug:> r: 'lights',
21:22:41.546 [pimatic-raspbee] debug:> t: 'event',
21:22:41.546 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' }
21:23:38.204 [pimatic-raspbee] debug: new message received
21:23:38.208 [pimatic-raspbee] debug: { attr:
21:23:38.208 [pimatic-raspbee] debug:> { id: '3',
21:23:38.208 [pimatic-raspbee] debug:> lastannounced: null,
21:23:38.208 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:23Z',
21:23:38.208 [pimatic-raspbee] debug:> manufacturername: '_TYZB01_dazsid15',
21:23:38.208 [pimatic-raspbee] debug:> modelid: 'TS0302',
21:23:38.208 [pimatic-raspbee] debug:> name: 'Window covering device 1',
21:23:38.208 [pimatic-raspbee] debug:> powerup: 7,
21:23:38.208 [pimatic-raspbee] debug:> swversion: null,
21:23:38.208 [pimatic-raspbee] debug:> type: 'Window covering device',
21:23:38.208 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' },
21:23:38.208 [pimatic-raspbee] debug:> e: 'changed',
21:23:38.208 [pimatic-raspbee] debug:> id: '3',
21:23:38.208 [pimatic-raspbee] debug:> r: 'lights',
21:23:38.208 [pimatic-raspbee] debug:> t: 'event',
21:23:38.208 [pimatic-raspbee] debug:> uniqueid: 'ec:1b:bd:ff:fe:8f:10:92-01' }
21:23:43.940 [pimatic-raspbee] debug: new message received
21:23:43.944 [pimatic-raspbee] debug: { attr:
21:23:43.944 [pimatic-raspbee] debug:> { id: '1',
21:23:43.944 [pimatic-raspbee] debug:> lastannounced: null,
21:23:43.944 [pimatic-raspbee] debug:> lastseen: '2021-02-16T20:23Z',
21:23:43.944 [pimatic-raspbee] debug:> manufacturername: 'dresden elektronik',
21:23:43.944 [pimatic-raspbee] debug:> modelid: 'ConBee II',
21:23:43.944 [pimatic-raspbee] debug:> name: 'Configuration tool 1',
21:23:43.944 [pimatic-raspbee] debug:> swversion: null,
21:23:43.944 [pimatic-raspbee] debug:> type: 'Configuration tool',
21:23:43.944 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' },
21:23:43.944 [pimatic-raspbee] debug:> e: 'changed',
21:23:43.944 [pimatic-raspbee] debug:> id: '1',
21:23:43.944 [pimatic-raspbee] debug:> r: 'lights',
21:23:43.944 [pimatic-raspbee] debug:> t: 'event',
21:23:43.944 [pimatic-raspbee] debug:> uniqueid: '00:21:2e:ff:ff:06:15:e6-01' }
``
yep, correct
further on thinking:
At least the stop button, from the raspbee device, as well as from the shutter switch, has completely to be decoupled from the slider.
Another aspect as I was testing around with rules:
Currently I’m not able, or I do not know the syntax, to set the raspbee devices parameters/variables by rule.
Checking the variables for the ‘When’ condition does work, but not changing them in the ‘then’ field.
That looks now more logic!
… but not 100% correct.
From the gui: Pressing ‘open’ the slider starts increasing, without stopping until 100% and the device is also switched to ‘open’. When stopping, it stops in the gui, but the shutter switch flips to ‘close/down’. I guess that should be ‘stop’.
Pressing close, the slider starts decreasing and also the device is switched to ‘close’, but when stopping then, the slider stops, but at the device nothing happens. I guess that should be also ‘stop’ then.
Then moving the slider more up/open: An error message occures (see below), but the percentages increase to the value set by the slider. Here the device firstly is switched correctly on ‘open’, but when the value is reached, it flips to ‘close’, which should be ‘stop’.
Moving the slider more down/close: Same error message occures, percentages decreases correctly, device is switched to ‘close’, but when reaching the value, nothing happens at the device, which should be ‘stop’ then.
… in addition: When pressing the ‘stop’ button in the gui, the device is switched to down, thus it fits to the above mentioned behavior