I just got a Tuya/Jinvoo ZigBee curtain switch (SM-SW101-ZC) to test if I can use it for my shutters.
I was able to get it binded via Phoscon to the ConBee II stick as a lamp (discovered as ‘Window covering device’ from Heiman, model: TS0302) and afterwards also discovered by Pimatic as device.
My problem is now, that in the device list of the Raspbee devices, there is no shutter.
I took the dimmer-device and was able to read the ‘status’:
Looks like pressing on the device’s button Up = 100%, Stop button = 50% and Down button = 0% = Off. So getting values from the devices seems working.
But it doesn’t work the other way round. Pressing buttons in Pimatic, resp. moving the slider of the dimmer device only feedbacks error messages (=‘bad request’).
Has someone an idea how this can be tackled, e. g. integration of a shutter in the RaspBee plugin?
Thanks in advance for a response
ZigBee Shutter Control not working - missing RaspBee Shutter Device
I meanwhile verified, that the shutter-switch is propperly working directly from the deCONZ GUI.
So it seems at leat really ‘only’ to be an Pimatic raspbee integration-gap
Hi all, I now got the confirmation, that the shutter switch has officially been integrated in the Deconz Vers 2.05.79:
So I guess, that now an update of the raspbee plugin is needed in addition, right?
Could someone take care for this?
Is there any news to this?
I also got this Shutter controller, it only works as a switch at the moment.
Hi @kosta, I while ago here
I just was able now to do all updates Phoscon -> 2.05.82, ConBee II firmeware -> 26650700 and last but not least also the raspbee plugin -> 0.1.7
Everything runs fine, but I’m still not able to use the above mentioned shutter steering device.
Besides the PhosconApp shows it as a light, allthough using the discovery routine for a switch, in the deconz gui it is shown correctly and also can be steerd via the gui correctly, in minimum up/down/stop.
As it works fine that way, shouldn’t it be possible to integrate it, or maybe in general a shutter device, in the list of the raspbee devices in Pimatic?
I’m not that deep in these details, but I’m wondering that everything else is availabel there (sensors, dimmers, lights, switches, etc.) but no shutter device.