robotic vacuum ecovacs-deebot ozmo 950 and etc

---

The setCleanspeed is a setting for the vacuum ventiltor (intensity of the the Fan).
Is that what you mean?

Yes is the Fan speed

Ok, you can test it in version 0.0.18. The command is

deebot <device-id> speed <number>|$speed-variable

Plugin is number 0.0.16

Thanks I have updated and in the rules is ok.
I can check this later when I home.
The physical test.

Can pleas change this

Waterlevel is no % That is the flow rate
1 = low
2 = medium
3 = high
4 = max

WaterBoxInfo
1 = true
0 = false

I don’t understand the Water change request because i’m not owning a Deebot.
Could explain a bit more what you want on the Waterlevel and WaterboxInfo?

But i did my assumption on this and published version 0.0.19

So I have updated to 0.0.19

A pic say more as 1000 worts

See waterlevel and waterbox

Waterbox is on the deebot is true
Water box is not on the deebot is false

And water level is the flow rate from the water level is the flow rate from the water is set in the deebot

1 = min
2 = normally
3 = high
4 = max

To change the water level can use

SetWaterLevel 1
Or
SetWaterLevel 2
Or
…

Thia can pleas implement

Did your clear the browser cache and refreshed the screen?

Yes I have this test. And clearly the cache.

Can you please check the plugin, have not function

Nothing work

I can give you me login details, then can you test all

But you had the screenshot?

Ok. Commando back, after restart work all.

Fan speed change nothing work

The formatting is as designed. I will change the nummber 1-4 to the names min to max
And will try to update the Speed command

Ok my wrong I have in the rules with [1] not work an when I type only the 1 work

I did it because pimatic had suggested it to me in the rules

Ok, thats fine. It had in an earlier version the brackets [] around the number. But in the newer version not.
The suggestion should not be there. I released version 0.0.20 with small improvement with the names for the waterlevel

Ok.

Waterlevel variable say unbekannt

Can implement the same as for fan

Here for water set level
SetWaterLevel 1
SetWaterLevel 2
SetWaterLevel 3
SetWaterLevel 4

@heiko1988 said in robotic vacuum ecovacs-deebot ozmo 950 and etc:

SetWaterLevel

You can test version 0.0.21

deebot <device.id> waterlevel [1..4] | $waterlevel-variable

Yeah, works perfect

So I have direct the next
Custom area

The command:

vacbot.run(“CustomArea”, “start”, “1890.000000,-1661.000000,288.000000,-3069.000000”, “1”);

comma-separated list of exactly 4 position values for x1,y1,x2,y2 (e.g. -3975.000000,2280.000000,-1930.000000,4575.000000)
cleanings
1, 2

The Koordinaten in a variable is best.

Then have custom area, can run the vacuum after breakfast only unter the table

Can pleas implement

I think then we have the most features for a vacuum robot

Hi, i will look at it but…
I think we need to move the issues and requests for this plugin to the github issue page and give the forum some rest
Just to start could you put the request in there?

Yes is ok

I have open a ticket on github
github feature request

There seems to be an issue with certain deebots losing connection after approximately 24 hours, it is described here: https://github.com/mrbungle64/ioBroker.ecovacs-deebot
(See known issues)
It looks like this is also the case for the library that is used in this plugin.
Is there a way to implement this “restart” solution in pimatic?

I’ve tried setting some rules that should start the robot for a short time but still connection is lost after about 24 hours.