The setCleanspeed is a setting for the vacuum ventiltor (intensity of the the Fan).
Is that what you mean?
-
Yes is the Fan speed
-
Plugin is number 0.0.16
Thanks I have updated and in the rules is ok.
I can check this later when I home.
The physical test.Can pleas change this
Waterlevel is no % That is the flow rate
1 = low
2 = medium
3 = high
4 = maxWaterBoxInfo
1 = true
0 = false -
I don’t understand the Water change request because i’m not owning a Deebot.
Could explain a bit more what you want on the Waterlevel and WaterboxInfo?But i did my assumption on this and published version 0.0.19
-
So I have updated to 0.0.19
A pic say more as 1000 worts
See waterlevel and waterbox
Waterbox is on the deebot is true
Water box is not on the deebot is falseAnd water level is the flow rate from the water level is the flow rate from the water is set in the deebot
1 = min
2 = normally
3 = high
4 = maxTo change the water level can use
SetWaterLevel 1
Or
SetWaterLevel 2
Or
…Thia can pleas implement
-
Yes I have this test. And clearly the cache.
Can you please check the plugin, have not function
Nothing work
I can give you me login details, then can you test all
-
Ok. Commando back, after restart work all.
Fan speed change nothing work
-
Ok my wrong I have in the rules with [1] not work an when I type only the 1 work
I did it because pimatic had suggested it to me in the rules
-
Ok, thats fine. It had in an earlier version the brackets [] around the number. But in the newer version not.
The suggestion should not be there. I released version 0.0.20 with small improvement with the names for the waterlevel -
Ok.
Waterlevel variable say unbekannt
Can implement the same as for fan
Here for water set level
SetWaterLevel 1
SetWaterLevel 2
SetWaterLevel 3
SetWaterLevel 4 -
@heiko1988 said in robotic vacuum ecovacs-deebot ozmo 950 and etc:
SetWaterLevel
You can test version 0.0.21
deebot <device.id> waterlevel [1..4] | $waterlevel-variable
-
Yeah, works perfect
-
So I have direct the next
Custom areaThe command:
vacbot.run(“CustomArea”, “start”, “1890.000000,-1661.000000,288.000000,-3069.000000”, “1”);
comma-separated list of exactly 4 position values for x1,y1,x2,y2 (e.g. -3975.000000,2280.000000,-1930.000000,4575.000000)
cleanings
1, 2The Koordinaten in a variable is best.
Then have custom area, can run the vacuum after breakfast only unter the table
Can pleas implement
I think then we have the most features for a vacuum robot
-
Hi, i will look at it but…
I think we need to move the issues and requests for this plugin to the github issue page and give the forum some rest
Just to start could you put the request in there? -
Yes is ok
I have open a ticket on github
github feature request -
There seems to be an issue with certain deebots losing connection after approximately 24 hours, it is described here: https://github.com/mrbungle64/ioBroker.ecovacs-deebot
(See known issues)
It looks like this is also the case for the library that is used in this plugin.
Is there a way to implement this “restart” solution in pimatic?I’ve tried setting some rules that should start the robot for a short time but still connection is lost after about 24 hours.