Gosund SP1 MQTT Energytopic ?

---

In English:
Hello everybody,
I ordered the Gosund SP1 4 days ago, flashed it with Tasmota and put it into operation yesterday. Since the sockets can measure energy, I would like to use this option when the washing machine is ready.
I can control the dose via MQTT, but how do I get all the data through MQTT, can not really handle the topics.
Here are the screenshots of my “settings” and what the socket provides

In German:
Hallo zusammen,
ich habe mir vor 4 Tagen die Gosund SP1 bestellt, diese mit Tasmota geflasht und gestern in Betrieb genommen. Da die Steckdosen Energie messen können würde ich dieses Möglichkeit gerne nutzen um mich benachrichtigen zu lassen wenn die Waschmaschine fertig ist.
Ich kann die Dose via MQTT steuern, aber wie komme ich via MQTT an die ganze Daten, komme mit den Topics nicht wirklich klar.
Anbei die Screenshots von meinen „Einstellungen“ und was die Steckdose alles zur Verfügung stellt

http://img18106.imagevenue.com/img.php?image=52741_1Steckdoseeinstellungen_122_180lo.JPG
http://img18116.imagevenue.com/img.php?image=52742_2Sensoreinstellungen1_122_558lo.JPG
http://img18115.imagevenue.com/img.php?image=52742_2Sensoreinstellungen2_122_1145lo.JPG
http://img18125.imagevenue.com/img.php?image=52743_3Tasmota_122_677lo.JPG

Yes, I did the same (see topic “Tasmota energy device (Watts etc), how to get the values”:

Picture didn’t fit, it think you understand the last part…

Change “stereo” for the name of your washing machine.

But my experience is that washing machines stops using energie for a while (sometimes 20 minutes) during a washing cycle.
So thats makes it not accurate to see if the washing machine is ready.

Thanks a lot!
I will try to difinieren a dependency in the rule. Time / consumption this should actually go

Works!
http://img28104.imagevenue.com/img.php?image=54730_2_122_212lo.JPG