pimatic-homeduino@0.9.12

---

I think I have it fixed now.

After unplugging the MySensors gateway (ttyUSB1) and plugging it back on again the error message at startup was gone.

After clearing the Chrome browser cache the Pimatic interface still does not work but in Firefox, IE11 and Edge it is working.
Still strange because I always used Chrome for Pimatic.

When scrolling down in this text dump I see a logon part at the end.
Submitting my credentials then show me a popup where again I have to submit my credentials and then the user interface is back.
In the url bar of Chrome I see my credentials (I replaced them with ******* below):
http://192.168.1.75/?username=*******&password=*******&rememberMe=on
Strange behaviour. Something with Chrome but how to solve?

After the update my roller shutters (rohrmotor24) look like this.

And the configuration like this, here are some settings missing

I can’t switch them, no on /off or up / down
All because of Jessi still has no Raspbian stretch.

@petjepet said in pimatic-homeduino@0.9.12:

cd /home/pi/pimatic-app/node_modules/pimatic-homeduino/
sudo rm -rf node_modules
sudo npm install --unsafe-perm

Hello

cd /home/pi/pimatic-app/node_modules/pimatic-homeduino/
sudo rm -rf node_modules
sudo npm install --unsafe-perm

After the orders, everything’s fine again. I can switch again

What have I changed with the command done?

@tehmilcho said in pimatic-homeduino@0.9.12:

Could not initialize the plugin “homeduino”: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.21’ not found (required by /home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/serialport/build/Release/serialport.node)

Another thing to try is to install libstdc++-6-dev.

sudo apt-get update
sudo apt-get install libstdc++-6-dev

@mwittig said in pimatic-homeduino@0.9.12:

sudo apt-get install libstdc+±6-dev

libstdc+±6-dev package cannot be found

@petjepet said in pimatic-homeduino@0.9.12:

The command sudo rm -rf node_module does that I believe and did not give an error.

I see this.
Pimatic restarted several times and browser also refreshed.

Still having the ttyUSB1 error.

In the log file the homeduino 0.9.12 seems to be working now, plugin is loaded and messages are arriving.

Issue with Chrome browser solved by removing and reinstalling Chrome.

@ortin
Did you solve the problem with the shutter3 protocol? If so, how?
I also have the problem that I can’t switch my shutters anymore.
However, I have Homeduino 0.9.18 and pimatic 0.9.52 in the meantime.
I had Homeduino 0.9.12 and then nothing installed. I have started the change only now.
I switched from pimatic 0.9.47 and Homeduino 0.9.11 to the newer versions. But also with node 4.6.2 and npm 2.15.11 before update.

Yes, for me it is working. Did you try to relearn at least one module for test?

@ortin, @Thrusty:
Hi there,
I’ve got the same problem with shutter3. After updating several plugins my shutters don’t work any more

How did you solve the problem? Just ReLearning the device?
Your help would be great!

cheers
Helene

Yes, I relearned it. But I really don’t know if this was really necessary. Just try one device.

@OrTiN, @Thrusty:
Hi there,
I just found out that ReLearning the device solves the problem! One shutter works again. Now I’ll crawl through the rest of my ten wallboxes … gngngngn.
Unnecessary like Gulasch am Ärmel

cheers
Helene

If you need some spare actors contact me. I have some rohrmotor24 wall switches here.