i2c 1-Wire Expansion Module DS2482S
Recently i bought this i2c 1-Wire Expansion Module, cause i need to use some DS18B20.
Pimatic-owjs, owfs, i2c tools and owserver installed.
My output of cat /mnt/1wire/28.2B7814020000/temperature
21.4375.
But owjs plunin always shows : error read value of OWFS sensor temp1: Error: connect ECONNREFUSED 127.0.0.1:4304
I guess that DS2482S is not supported. No matter what I try, nothing works.
@bill-blacksoll said in i2c 1-Wire Expansion Module DS2482S:
But owjs plunin always shows : error read value of OWFS sensor temp1: Error: connect ECONNREFUSED 127.0.0.1:4304
I think it might be a configuration problem. See https://github.com/mspetik/pimatic-owjs/issues/1
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
My setup was fine. After many tries it works only if i run
sudo service owserver stop
sudo /opt/owfs/bin/owserver -c /etc/owfs.conf --i2c=ALL:ALL --allow_other /mnt/1wire