Currently I use HomeduinoRFSwitch with protocol âswitch2â. One switch controls simulantiously serveral lamps. Sometimes there are rf transmission problems and only some lamps go on. With HomeduinoRFSwitch I can not press the ON side twice, I have to press first OFF and the ON again which is bad because all devices which were already ON went OFF and probably ON again.
Instead of a switch I would like to use 2 buttons for On and Off like on hardware remote switches. This would looks more natural and also allows to press the Off or On button twice in case of failures of rf transmission.
I tried to use HomeduinoRFButtonsDevice which looks good from the GUI but I can only switch on the device but not off.
"buttons": [
{
"id": "On",
"text": "On",
"protocols": [
{
"name": "switch2",
"options": {
"state": "true",
"houseCode": "17",
"unitCode": "2"
},
"send": true,
"receive": true
}
]
},
{
"id": "Off",
"text": "Off",
"protocols": [
{
"name": "switch2",
"options": {
"state": "false",
"houseCode": "17",
"unitCode": "2"
},
"send": true,
"receive": true
}
]
}
],
"id": "hd17-2",
"name": "hd17-2",
"class": "HomeduinoRFButtonsDevice"
}
May be this is not implemented, then please transfer this issue to a feature request.