rules engine + cron plugin + pilight plugin don't comply with sleep time

---

Hi
First of all, thanks for this easy system to work with!!!
I’m using rules engine to manage pilight’s kaku_screen[ejlr-1000 ]… the rule seems like this:

if btnAllScreensUP is pressed then
raise S1 and after 2 seconds raise S2 and after 2 seconds raise S3 and after 2 seconds raise Hall and after 2 seconds raise C1 and after 2 seconds raise C2 and after 2 seconds raise D1 and after 2 seconds raise H1

When I run the rule, only the first 2 sleep seconds works… the log seems like this:
09:45:44.236 [pimatic] info: rule blinds-up: raised S1
09:45:46.270 [pimatic] info: rule blinds-up: raised S2
09:45:46.300 [pimatic] info: rule blinds-up: raised S3
09:45:46.329 [pimatic] info: rule blinds-up: raised Hall
09:45:46.361 [pimatic] info: rule blinds-up: raised C1
09:45:46.393 [pimatic] info: rule blinds-up: raised C2
09:45:46.495 [pimatic] info: rule blinds-up: raised D1
09:45:46.526 [pimatic] info: rule blinds-up: raised H1

I appreciate any idea on how to get the 2 seconds sleep between devices…

You got a logical failure. The time base is the time where the rule is triggered. So you have to write
after 2 seconds… after 4 seconds… after 6 seconds and so on.

Each “and” creates a new “crown tab” with the given delay from execution of the rule.

Thanks a lot!!!
easy solution after all…