Supported devices (plug and play)

---

Updated.

Brand: MBO
Model: Telecommander 01
Type: switch20
Description: Socket Switch
Notes: has four DIP-switches internally, factory setting is 0-0-0-0 (unitCode:0), retired product, but can be occasionally found on e-bay, MBO brand is part of Medion since 2004

Hello,

I see here many supported devices for pimatic and a many of KAKU.
I have 2 dimmers of KAKU ACD-300 and i see that ACD-200 is supported but wen i use this device i will not work. Is the ACD-300 not supported ?. I think only the 200/300 watt is different.

thanks gerrit

@ghv
Maybe, the Device wasn’t tested from anybody. All the Supported Device are tested.

The DEMA 59009 looks exactly like the “Impulse”!

Brand: Intertechno
Model: ITLR-300
Type: dimmer1
Description: Socket dimmer
Notes: Suitable for Lamps from 40-300 Watts, Product Description & Manual

Brand: TFA
Model: TFA 30.3200
Type: heating-thermostat

    {
      "id": "weatherstation",
      "name": "Temperatur/Feuchte",
      "class": "HomeduinoRFWeatherStation",
      "protocols": [
        {
          "name": "weather3",
          "options": {
            "id": 53
          }
        }
      ],
      "values": [
        "temperature",
        "humidity"
      ]
    }

Updated.

Also added Eurodomest 972080. Can be bought by action (dutch store). 3 switches for 10 euro.

Z31743A-TX not working here

Multi Kon Trade Water Sensor
http://www.amazon.de/dp/B00RTDMC4S/ref=pe_386171_38075861_TE_item

i think this device works also, looks like the same transmitter.
http://www.jaranda.de/Funk-Wassermelder

{
“id”: “watersensor”,
“name”: “water sensor”,
“class”: “HomeduinoRFPir”,
“protocols”: [{
“name”: “pir2”,
“options”: {
“unit”: 28,
“id”: 14
}
}],
“resetTime”: 6000
}

Brand: Xiron
Model: Xiron Weather Station
Type: weather11
Description: Sold via eBay and various shops elswhere, e.g. http://www.blokker.nl/nl/blknl/uit-de-folder-3/xiron-weerstation-1
Notes: has a selflerning mode. The id needs to bediscovered using the debug mode of pimatic-homeduino

It might also be helful to add a section on device currently not supprored.

E.g.

Brand: Hama / Meade / Honeywell
Model: TC33C
Description: 433 Mhz Temperature & Humidity Sensor.
Notes: Use the Hideki protocol. See forum thread http://forum.pimatic.org/topic/807/hama-wheater-sensor-not-showing-up-in-debug-logs and issue https://github.com/pimatic/rfcontroljs/issues/68

Apparently, KAKU devices are also sold under the COCO brand. So it might be helpful to include both brand names

For example:

• http://www.coco-technology.com/shop/en/awst-8800/
• http://www.klikaanklikuit.nl/shop/nl/wandschakelaar-awst-8800/

See also http://www.openremote.org/display/docs/How+To±+KAKU+and+COCO±+OpenRemote

Brand: Conrad
Model: Nr. 640472
Type: switch2
Description: Socket Switch 2000W
Notes: Typically sold as a bundle (Nr. 640475) of three plugs and a Remote Control, Datasheet

@sweebee Are you still maintaining this list?

Yes, but hadn’t much time the last few weeks. Will update it now

Edit: Updated.

@sweebee
thx a lot for your efforts

Added Coco ACM-LV24 and AWMR-300

Brand: KERUI CS-D003
Chipset: EV1527
Type: contact2
Description: KERUI/noname contact sensor for about 5 EU (battery included)
Notes: Works out of the box as contact2 sensor. Only sends ‘open’ signal, use autoReset in config if needed.

can be bought on ali express (be sure to order the 433mhz-version, which is standard)

@lxz Thanks! Added it to the Sensors section.