[solved]1wire and i2c problem with Raspbian Stretch

---

Hello, together,
I have recorded a new USB-Stick with Raspbian Stretch a few days ago, have installed Pimatic and have copied the Config.

After had to start I ascertain, there is no connection with 1wire and to i2c.
In the meantime, I could find out that in Stretch something has changed. As well as the supply of 1wire and i2c. Both things are directly in the GPIO of the Raspberry.

What can I make to be able to connect again 1wire and i2c?

cut out from config. txt

dtparam=i2c_arm=on
dtparam=i2c1=on
dtoverlay=w1-gpio,gpiopin=4

/etc/modules

i2c-dev
w1-gpio
w1-therm

The problem has taken care. Because problem was nothing.
There I have made a stupid mistake.

I use a SD cards and an USB-Stick for Raspberry and pimatic.
However, in order to try out I had put only the USB Stick in the work-Raspberry. Unfortunately, I had not exchanged the SD card.
Stupid mistake

@Thrusty don’t care about it, shit happens every day