Rules are not executed

---

Hello,
I have a problem with rules. I have “installed” Pimatic via docker on my raspberry.

Everythings work, but the rules are not executed. There is also no failure entry in the messages log.

I can turn on and of all my lights with “alle-tasten” on my Favorites. The variable is $alle-tasten.state(attribute).

The rule is

{
      "id": "lampenaus22",
      "name": "LampenAus22",
      "rule": "when its 22:05 then turn alle-tasten off",
      "active": true,
      "logging": true
    },

Is something wrong with my rule?

Sebastian

@shgmongo What is alle-tasten? A button?
It should then be WHEN…THEN press alle-tasten

Hello,

i found the problem. The rule uses UTC time and not Local time. Therefore they are two hour difference.
Wenn I want to turn on the light at 16 o´clock, the rule must have the time 14 o´clock. How can I chnage this?

pi@raspberrypi:~ $ sudo dpkg-reconfigure tzdata

Current default time zone: 'Europe/Berlin'
Local time is now:      Sat Aug 19 15:54:18 CEST 2017.
Universal Time is now:  Sat Aug 19 13:54:18 UTC 2017.

@shgmongo run raspi-config select option 4, go from there.

@Gleno0h
Allready done. But nothing changed.
Could be the problem, that I use pimatic in a docker enviroment?

pi@raspberrypi:~ $ sudo raspi-config

Current default time zone: 'Europe/Berlin'
Local time is now:      Sat Aug 19 17:44:39 CEST 2017.
Universal Time is now:  Sat Aug 19 15:44:39 UTC 2017.

@shgmongo i dont know anything about docking so i cant tell. The 2 hours difference are normal. Cant tell why pimatic is using another locale. What did you set in your config?

10:51:22 info [pimatic-cron]: the time is: Sat Aug 19 2017 10:51:22 GMT+0200 (CEST)

Mine adds 2 hours correctly. I think you didnt set the locale right.

Go to menu - configuration and paste your settings part on the top.

@Gleno0h
I set nothing…

{
  "settings": {
    "locale": "de",
    "httpServer": {
      "enabled": true,
      "port": 80
    },
    "database": {
      "deviceAttributeLogging": [
        {
          "deviceId": "*",
          "attributeName": "*",
          "type": "*",
          "interval": "0",
          "expire": "7d"
        },
        {
          "deviceId": "*",
          "attributeName": "*",
          "type": "continuous",
          "interval": "5min",
          "expire": "7d"
        },
        {
          "deviceId": "*",
          "attributeName": "temperature",
          "type": "number",
          "expire": "1y"
        },
        {
          "deviceId": "*",
          "attributeName": "humidity",
          "type": "number",
          "expire": "1y"
        }
      ],

@shgmongo you have DE.

Please read this page, set timezone part.

https://www.ivankrizsan.se/2015/10/31/time-in-docker-containers/