[Solved] 2 usb serial devices

---

I’m using 2 usb serial devices (arduino nano’s). 1 for homeduino and 1 for mysensors. But when rebooting the ports can change. sometimes homeduino is ttyUSB0 and the other time ttyUSB1.

Is there a way to connect with the serial code from a device (ID of the arduino)? I thought some1 posted it on the pimatic github page, but i can’t find it.

the post is from @Yves911 here in the forum. But idont know where

you can do this with udev
here’s a howto i found on the web.

http://hintshop.ludvig.co.nz/show/persistent-names-usb-serial-devices/

ha! i just found yves threat!
have a look here : http://forum.pimatic.org/topic/42/tip-homeduino-usb
thanks for the hint ronny!

guess i should add that to the homeduino tutorial