Error by sending message with pushover

---

Situation:
I have an arduino nano which is connected to an NFR24l01 radio.
A door sensor is connected to the arduino nano.
When the status off the door sensor opened, i have configured that there will be send a message through Pushover to my iphone.
Most of the times this works, but also often not.
If not i get this error. I do not know what to do with it.

error [pimatic]: Error on evaluation of rule condition of rule Frontdoor-sensor: socket hang up
13:36:02error [pimatic]: rule Frontdoor-sensor error executing an action: socket hang up

Then if i try again it works, really weird.
I allready updated pushover plugin to 0.9.3 but that did not help.
Is there any one who can help me.

@mcronald Can you please post your “Frontdoor-sensor” action, please?

NRF24|01 sounds like mysensors, isn’t it?
if so, how are your serial settings? dev/tty, serial/by-path, serial/by-id?
maybe set up the serial/by-path. just guessing, but maybe there’s a collision on the usb port ?!

You mean the rule i have made?
This is the rule:
When Voordeur is opened and $alarmsysteem =1
Then
push title:“Voordeur sensor” message:“Voordeur is open”

(The error i discribed i mentioned Frontdoor-sensor twice. (in real it is called Voordeur-sensor (it is dutch)

@leader21
It is my sensors indead.
Can you tell me how i can get the info you want it?
USB is not an option i guess.
My raspian pi has through an usb port a serial gateway mounted.
But this doorsensor is connected to the arduino nano, and the NFR radio also to the nano. There is no USB connection.