[pimatic-echo] Control your pimatic devices using Amazon's echo
@ortin The brightness value sent from Alexa is between 0 and 255. So every value in between is fine. pimatic-echo does a conversion to get the brightness in percent.
So i would like to ask again: What are the values for 100% and 0%. If it is 255 and 0, thats normal.
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten
@michbeck100 said in [pimatic-echo] Control your pimatic devices using Amazon's echo:
So i would like to ask again: What are the values for 100% and 0%.
Seem I overlook this. Have no idea when and where you asked this!
22:00:34.767 [pimatic-echo] debug: changing state for Galerie: {
22:00:34.767 [pimatic-echo] debug:> "bri": 1
22:00:34.767 [pimatic-echo] debug:>}
22:00:34.791 [pimatic-echo] debug: setting brightness of Galerie to 1
22:00:44.688 [pimatic-echo] debug: changing state for Galerie: {
22:00:44.688 [pimatic-echo] debug:> "bri": 254
22:00:44.688 [pimatic-echo] debug:>}
22:00:44.690 [pimatic-echo] debug: setting brightness of Galerie to 254
22:00:54.128 [pimatic-echo] debug: changing state for Galerie: {
22:00:54.128 [pimatic-echo] debug:> "bri": 76
22:00:54.128 [pimatic-echo] debug:>}
22:00:54.130 [pimatic-echo] debug: setting brightness of Galerie to 76
I made a new device discovery with the 2nd gen. Echo for this, to have the Royal Philips Eletronics intelligant device instead of Lux Light.
@ortin maybe Alexa says that 100% and 0% are not valid because you can also just switch the light on and off? I don’t know. I’m planning to buy a new echo on the cyber monday week. Before that I can’t tell what the problem is.
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten
For sure you will handle it after getting the device for your own test…
Yesterday after I have opened my Alexa app (via browser) I saw, that there came back devices I deleted before. I want only to have devices in the SmartHome section with the alternative name and not the native name of any. Is it the same for you?
@ortin I have seen this before. Don’t know why this happens. If you use the name property in the echo section it will be used solely for the name that Alexa knows. Don’t use the “additionalNames” property. These are obviously additional names.
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten
The plan was to have more than one name for my devices. But this was more a test, because the Echo mostly told me, that “there is more than one device with this name”, even every additional name is unique.
The “name” property is somehow blocked for me. Means I can’t change is via GUI. I have to do it directly in the config.json. Is this the normal way.
@ortin
disable them in the mobile alexa app and they should be permanent blocked. i have done them in the webfontent and next day all Devices was listet again… but in the disabled in App stays still disabled…
See what you mean, will try it.
@michbeck100: Regarding the name property is there really only the way over the config.json. I tried it with Chrome and Firefox. The field is there, when I click in it, it get no “focus” to write in it.
@ortin I couldn’t find out, why its disabled in the first place. This is somehow an issue in the gui. This kind of config extension wasn’t really intended to be done by any plugins before pimatic-hap and pimatic-echo.
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten
i have the same problem. the name field is greyed out.
If i change the property from “name” to something else.(for example name2)
the checkbox appears and works like wanted.
@kosta Ok, thats strange but maybe thats the answer. I will use that info in one of the next versions.
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten
maybe because “name” is used also as normal option and is needed.
so in the echo context the gui don’t show a checkbox for the name option
@kosta Just tried to change the property to “nameOverride” but it didn’t make a difference. How did you change the property?
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten
@kosta Please note that once you have set the property to any value, the text field isn’t disabled anymore. This also worked before with the property named “name”.
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten
With this change the checkbox appears, also for all devices.
also for those who didn’t have a “name” config before.
in the echo.coffee line 479
class EchoDeviceConfigExtension
configSchema:
echo:
description: "Additional options specific for use with pimatic-echo"
type: "object"
required: []
properties:
name2:
an other option is to set the default to “”
class EchoDeviceConfigExtension
configSchema:
echo:
description: "Additional options specific for use with pimatic-echo"
type: "object"
properties:
name2:
default: ""
New version 0.4.7 is on the way 
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten
Great works!!! THX!!!
Great work! I have an Echo 2 and am able to discover the devices. Switches work perfect so far.
Dimmers aren’t working as expected. When switching a dimmer on/off, Alexa responds with “ok”.
When I say “Alexa dim <device> to x percent” the value changes in Pimatic, 9/10 it responds with “<device> is not responding”.
Using this plugin to turn on a z-wave dimmer, it gets set to 100%. Normally when I turn on a dimmer in pimatic (with a rule or Razberry skill), it gets set to last value. Is this a limitatation of the plugin, or could it be a setting for the dimmer?
22:38:44.706 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02/state
22:38:44.710 [pimatic-echo] debug: Payload: {
22:38:44.710 [pimatic-echo] debug:> "bri": 202
22:38:44.710 [pimatic-echo] debug:>}
22:38:44.714 [pimatic-echo] debug: Headers: {
22:38:44.714 [pimatic-echo] debug:> "content-type": "application/json",
22:38:44.714 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:38:44.714 [pimatic-echo] debug:> "host": "192.168.1.52",
22:38:44.714 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:38:44.714 [pimatic-echo] debug:> "accept-encoding": "gzip",
22:38:44.714 [pimatic-echo] debug:> "content-length": "11"
22:38:44.714 [pimatic-echo] debug:>}
22:38:44.736 [pimatic-echo] debug: changing state for Dummy lights: {
22:38:44.736 [pimatic-echo] debug:> "bri": 202
22:38:44.736 [pimatic-echo] debug:>}
22:38:44.744 [pimatic-echo] debug: setting brightness of Dummy lights to 202
22:38:44.762 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02
22:38:44.766 [pimatic-echo] debug: Headers: {
22:38:44.766 [pimatic-echo] debug:> "content-type": "application/json",
22:38:44.766 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:38:44.766 [pimatic-echo] debug:> "host": "192.168.1.52",
22:38:44.766 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:38:44.766 [pimatic-echo] debug:> "accept-encoding": "gzip"
22:38:44.766 [pimatic-echo] debug:>}
22:38:44.787 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wkylj&b64=1
22:38:44.791 [pimatic-echo] debug: Headers: {
22:38:44.791 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:38:44.791 [pimatic-echo] debug:> "accept": "*/*",
22:38:44.791 [pimatic-echo] debug:> "host": "localhost",
22:38:44.791 [pimatic-echo] debug:> "connection": "close"
22:38:44.791 [pimatic-echo] debug:>}
22:38:45.786 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02
22:38:45.791 [pimatic-echo] debug: Headers: {
22:38:45.791 [pimatic-echo] debug:> "content-type": "application/json",
22:38:45.791 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:38:45.791 [pimatic-echo] debug:> "host": "192.168.1.52",
22:38:45.791 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:38:45.791 [pimatic-echo] debug:> "accept-encoding": "gzip"
22:38:45.791 [pimatic-echo] debug:>}
22:38:46.821 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02
22:38:46.826 [pimatic-echo] debug: Headers: {
22:38:46.826 [pimatic-echo] debug:> "content-type": "application/json",
22:38:46.826 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:38:46.826 [pimatic-echo] debug:> "host": "192.168.1.52",
22:38:46.826 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:38:46.826 [pimatic-echo] debug:> "accept-encoding": "gzip"
22:38:46.826 [pimatic-echo] debug:>}
22:38:47.898 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_WkzWC&b64=1
22:38:47.908 [pimatic-echo] debug: Headers: {
22:38:47.908 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:38:47.908 [pimatic-echo] debug:> "accept": "*/*",
22:38:47.908 [pimatic-echo] debug:> "host": "localhost",
22:38:47.908 [pimatic-echo] debug:> "connection": "close"
22:38:47.908 [pimatic-echo] debug:>}
22:38:50.945 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wk-Gp&b64=1
22:38:50.950 [pimatic-echo] debug: Headers: {
22:38:50.950 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:38:50.950 [pimatic-echo] debug:> "accept": "*/*",
22:38:50.950 [pimatic-echo] debug:> "host": "localhost",
22:38:50.950 [pimatic-echo] debug:> "connection": "close"
22:38:50.950 [pimatic-echo] debug:>}
22:38:53.988 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wk_0Q&b64=1
22:38:53.992 [pimatic-echo] debug: Headers: {
22:38:53.992 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:38:53.992 [pimatic-echo] debug:> "accept": "*/*",
22:38:53.992 [pimatic-echo] debug:> "host": "localhost",
22:38:53.992 [pimatic-echo] debug:> "connection": "close"
22:38:53.992 [pimatic-echo] debug:>}
22:38:54.024 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wk_0-&b64=1
22:38:54.028 [pimatic-echo] debug: Headers: {
22:38:54.028 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:38:54.028 [pimatic-echo] debug:> "accept": "*/*",
22:38:54.028 [pimatic-echo] debug:> "host": "localhost",
22:38:54.028 [pimatic-echo] debug:> "connection": "close"
22:38:54.028 [pimatic-echo] debug:>}
22:38:57.066 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wk_mV&b64=1
22:38:57.070 [pimatic-echo] debug: Headers: {
22:38:57.070 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:38:57.070 [pimatic-echo] debug:> "accept": "*/*",
22:38:57.070 [pimatic-echo] debug:> "host": "localhost",
22:38:57.070 [pimatic-echo] debug:> "connection": "close"
22:38:57.070 [pimatic-echo] debug:>}
22:38:57.111 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wk_n9&b64=1
22:38:57.115 [pimatic-echo] debug: Headers: {
22:38:57.115 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:38:57.115 [pimatic-echo] debug:> "accept": "*/*",
22:38:57.115 [pimatic-echo] debug:> "host": "localhost",
22:38:57.115 [pimatic-echo] debug:> "connection": "close"
22:38:57.115 [pimatic-echo] debug:>}
22:38:57.140 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wk_ng&b64=1
22:38:57.145 [pimatic-echo] debug: Headers: {
22:38:57.145 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:38:57.145 [pimatic-echo] debug:> "accept": "*/*",
22:38:57.145 [pimatic-echo] debug:> "host": "localhost",
22:38:57.145 [pimatic-echo] debug:> "connection": "close"
22:38:57.145 [pimatic-echo] debug:>}
22:39:00.188 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl0XF&b64=1
22:39:00.200 [pimatic-echo] debug: Headers: {
22:39:00.200 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:00.200 [pimatic-echo] debug:> "accept": "*/*",
22:39:00.200 [pimatic-echo] debug:> "host": "localhost",
22:39:00.200 [pimatic-echo] debug:> "connection": "close"
22:39:00.200 [pimatic-echo] debug:>}
22:39:00.234 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl0X_&b64=1
22:39:00.241 [pimatic-echo] debug: Headers: {
22:39:00.241 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:00.241 [pimatic-echo] debug:> "accept": "*/*",
22:39:00.241 [pimatic-echo] debug:> "host": "localhost",
22:39:00.241 [pimatic-echo] debug:> "connection": "close"
22:39:00.241 [pimatic-echo] debug:>}
22:39:03.395 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl1HY&b64=1
22:39:03.401 [pimatic-echo] debug: Headers: {
22:39:03.401 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:03.401 [pimatic-echo] debug:> "accept": "*/*",
22:39:03.401 [pimatic-echo] debug:> "host": "localhost",
22:39:03.401 [pimatic-echo] debug:> "connection": "close"
22:39:03.401 [pimatic-echo] debug:>}
22:39:03.523 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl1J_&b64=1
22:39:03.534 [pimatic-echo] debug: Headers: {
22:39:03.534 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:03.534 [pimatic-echo] debug:> "accept": "*/*",
22:39:03.534 [pimatic-echo] debug:> "host": "localhost",
22:39:03.534 [pimatic-echo] debug:> "connection": "close"
22:39:03.534 [pimatic-echo] debug:>}
22:39:06.580 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl257&b64=1
22:39:06.585 [pimatic-echo] debug: Headers: {
22:39:06.585 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:06.585 [pimatic-echo] debug:> "accept": "*/*",
22:39:06.585 [pimatic-echo] debug:> "host": "localhost",
22:39:06.585 [pimatic-echo] debug:> "connection": "close"
22:39:06.585 [pimatic-echo] debug:>}
22:39:06.634 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl25m&b64=1
22:39:06.639 [pimatic-echo] debug: Headers: {
22:39:06.639 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:06.639 [pimatic-echo] debug:> "accept": "*/*",
22:39:06.639 [pimatic-echo] debug:> "host": "localhost",
22:39:06.639 [pimatic-echo] debug:> "connection": "close"
22:39:06.639 [pimatic-echo] debug:>}
22:39:06.676 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl26U&b64=1
22:39:06.680 [pimatic-echo] debug: Headers: {
22:39:06.680 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:06.680 [pimatic-echo] debug:> "accept": "*/*",
22:39:06.680 [pimatic-echo] debug:> "host": "localhost",
22:39:06.680 [pimatic-echo] debug:> "connection": "close"
22:39:06.680 [pimatic-echo] debug:>}
22:39:08.196 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02
22:39:08.201 [pimatic-echo] debug: Headers: {
22:39:08.201 [pimatic-echo] debug:> "content-type": "application/json",
22:39:08.201 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:39:08.201 [pimatic-echo] debug:> "host": "192.168.1.52",
22:39:08.201 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:39:08.201 [pimatic-echo] debug:> "accept-encoding": "gzip"
22:39:08.201 [pimatic-echo] debug:>}
22:39:08.224 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02/state
22:39:08.235 [pimatic-echo] debug: Payload: {
22:39:08.235 [pimatic-echo] debug:> "bri": 51
22:39:08.235 [pimatic-echo] debug:>}
22:39:08.239 [pimatic-echo] debug: Headers: {
22:39:08.239 [pimatic-echo] debug:> "content-type": "application/json",
22:39:08.239 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:39:08.239 [pimatic-echo] debug:> "host": "192.168.1.52",
22:39:08.239 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:39:08.239 [pimatic-echo] debug:> "accept-encoding": "gzip",
22:39:08.239 [pimatic-echo] debug:> "content-length": "10"
22:39:08.239 [pimatic-echo] debug:>}
22:39:08.245 [pimatic-echo] debug: changing state for Dummy lights: {
22:39:08.245 [pimatic-echo] debug:> "bri": 51
22:39:08.245 [pimatic-echo] debug:>}
22:39:08.247 [pimatic-echo] debug: setting brightness of Dummy lights to 51
22:39:08.316 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02
22:39:08.321 [pimatic-echo] debug: Headers: {
22:39:08.321 [pimatic-echo] debug:> "content-type": "application/json",
22:39:08.321 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:39:08.321 [pimatic-echo] debug:> "host": "192.168.1.52",
22:39:08.321 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:39:08.321 [pimatic-echo] debug:> "accept-encoding": "gzip"
22:39:08.321 [pimatic-echo] debug:>}
22:39:09.723 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl2sE&b64=1
22:39:09.728 [pimatic-echo] debug: Headers: {
22:39:09.728 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:09.728 [pimatic-echo] debug:> "accept": "*/*",
22:39:09.728 [pimatic-echo] debug:> "host": "localhost",
22:39:09.728 [pimatic-echo] debug:> "connection": "close"
22:39:09.728 [pimatic-echo] debug:>}
22:39:09.773 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl2sq&b64=1
22:39:09.777 [pimatic-echo] debug: Headers: {
22:39:09.777 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:09.777 [pimatic-echo] debug:> "accept": "*/*",
22:39:09.777 [pimatic-echo] debug:> "host": "localhost",
22:39:09.777 [pimatic-echo] debug:> "connection": "close"
22:39:09.777 [pimatic-echo] debug:>}
22:39:09.811 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl2tZ&b64=1
22:39:09.815 [pimatic-echo] debug: Headers: {
22:39:09.815 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:09.815 [pimatic-echo] debug:> "accept": "*/*",
22:39:09.815 [pimatic-echo] debug:> "host": "localhost",
22:39:09.815 [pimatic-echo] debug:> "connection": "close"
22:39:09.815 [pimatic-echo] debug:>}
22:39:12.878 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl3dL&b64=1
22:39:12.883 [pimatic-echo] debug: Headers: {
22:39:12.883 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:12.883 [pimatic-echo] debug:> "accept": "*/*",
22:39:12.883 [pimatic-echo] debug:> "host": "localhost",
22:39:12.883 [pimatic-echo] debug:> "connection": "close"
22:39:12.883 [pimatic-echo] debug:>}
22:39:15.931 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl4N3&b64=1
22:39:15.937 [pimatic-echo] debug: Headers: {
22:39:15.937 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:15.937 [pimatic-echo] debug:> "accept": "*/*",
22:39:15.937 [pimatic-echo] debug:> "host": "localhost",
22:39:15.937 [pimatic-echo] debug:> "connection": "close"
22:39:15.937 [pimatic-echo] debug:>}
22:39:15.978 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl4Nz&b64=1
22:39:15.983 [pimatic-echo] debug: Headers: {
22:39:15.983 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:15.983 [pimatic-echo] debug:> "accept": "*/*",
22:39:15.983 [pimatic-echo] debug:> "host": "localhost",
22:39:15.983 [pimatic-echo] debug:> "connection": "close"
22:39:15.983 [pimatic-echo] debug:>}
22:39:16.030 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl4OY&b64=1
22:39:16.035 [pimatic-echo] debug: Headers: {
22:39:16.035 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:16.035 [pimatic-echo] debug:> "accept": "*/*",
22:39:16.035 [pimatic-echo] debug:> "host": "localhost",
22:39:16.035 [pimatic-echo] debug:> "connection": "close"
22:39:16.035 [pimatic-echo] debug:>}
22:39:16.062 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl4PK&b64=1
22:39:16.065 [pimatic-echo] debug: Headers: {
22:39:16.065 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:16.065 [pimatic-echo] debug:> "accept": "*/*",
22:39:16.065 [pimatic-echo] debug:> "host": "localhost",
22:39:16.065 [pimatic-echo] debug:> "connection": "close"
22:39:16.065 [pimatic-echo] debug:>}
22:39:18.026 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02
22:39:18.030 [pimatic-echo] debug: Headers: {
22:39:18.030 [pimatic-echo] debug:> "content-type": "application/json",
22:39:18.030 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:39:18.030 [pimatic-echo] debug:> "host": "192.168.1.52",
22:39:18.030 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:39:18.030 [pimatic-echo] debug:> "accept-encoding": "gzip"
22:39:18.030 [pimatic-echo] debug:>}
22:39:18.056 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02/state
22:39:18.060 [pimatic-echo] debug: Payload: {
22:39:18.060 [pimatic-echo] debug:> "bri": 228
22:39:18.060 [pimatic-echo] debug:>}
22:39:18.062 [pimatic-echo] debug: Headers: {
22:39:18.062 [pimatic-echo] debug:> "content-type": "application/json",
22:39:18.062 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:39:18.062 [pimatic-echo] debug:> "host": "192.168.1.52",
22:39:18.062 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:39:18.062 [pimatic-echo] debug:> "accept-encoding": "gzip",
22:39:18.062 [pimatic-echo] debug:> "content-length": "11"
22:39:18.062 [pimatic-echo] debug:>}
22:39:18.065 [pimatic-echo] debug: changing state for Dummy lights: {
22:39:18.065 [pimatic-echo] debug:> "bri": 228
22:39:18.065 [pimatic-echo] debug:>}
22:39:18.067 [pimatic-echo] debug: setting brightness of Dummy lights to 228
22:39:18.113 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02
22:39:18.117 [pimatic-echo] debug: Headers: {
22:39:18.117 [pimatic-echo] debug:> "content-type": "application/json",
22:39:18.117 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:39:18.117 [pimatic-echo] debug:> "host": "192.168.1.52",
22:39:18.117 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:39:18.117 [pimatic-echo] debug:> "accept-encoding": "gzip"
22:39:18.117 [pimatic-echo] debug:>}
22:39:19.104 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl58q&b64=1
22:39:19.108 [pimatic-echo] debug: Headers: {
22:39:19.108 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:19.108 [pimatic-echo] debug:> "accept": "*/*",
22:39:19.108 [pimatic-echo] debug:> "host": "localhost",
22:39:19.108 [pimatic-echo] debug:> "connection": "close"
22:39:19.108 [pimatic-echo] debug:>}
22:39:19.136 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02
22:39:19.140 [pimatic-echo] debug: Headers: {
22:39:19.140 [pimatic-echo] debug:> "content-type": "application/json",
22:39:19.140 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:39:19.140 [pimatic-echo] debug:> "host": "192.168.1.52",
22:39:19.140 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:39:19.140 [pimatic-echo] debug:> "accept-encoding": "gzip"
22:39:19.140 [pimatic-echo] debug:>}
22:39:20.154 [pimatic-echo] debug: Request to /api/83b7780291a6ceffbe0bd049104df/lights/02
22:39:20.160 [pimatic-echo] debug: Headers: {
22:39:20.160 [pimatic-echo] debug:> "content-type": "application/json",
22:39:20.160 [pimatic-echo] debug:> "user-agent": "Dalvik/2.1.0 (Linux; U; Android 5.1.1; AEORD Build/LVY48F)",
22:39:20.160 [pimatic-echo] debug:> "host": "192.168.1.52",
22:39:20.160 [pimatic-echo] debug:> "connection": "Keep-Alive",
22:39:20.160 [pimatic-echo] debug:> "accept-encoding": "gzip"
22:39:20.160 [pimatic-echo] debug:>}
22:39:22.135 [pimatic-echo] debug: Request to /socket.io/?username=<username>&password=<password>&EIO=3&transport=polling&t=L_Wl5uD&b64=1
22:39:22.140 [pimatic-echo] debug: Headers: {
22:39:22.140 [pimatic-echo] debug:> "user-agent": "node-XMLHttpRequest",
22:39:22.140 [pimatic-echo] debug:> "accept": "*/*",
22:39:22.140 [pimatic-echo] debug:> "host": "localhost",
22:39:22.140 [pimatic-echo] debug:> "connection": "close"
22:39:22.140 [pimatic-echo] debug:>}
In this log the second time dimming (bri:51) it responded with “ok”.
@patjee setting a dimmer to the last state is still a missing feature.
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten