Hold button and repeat signals

---

My heater has a hotter/colder function (up/down) and i have to hold a button to adjust it. This is not possible in pimatic. pimatic sends 1(7 repeats) message and stops. So i have to press it like 100 times to set it from the highest point to the lowest.

So while holding down the button, keep sending RF messages.

Or a way to set the repeats (RF repeats) for a device. Something like:

"repeat": 25,

{
      "id": "keuken-kachel-stand",
      "name": "Kachel",
      "class": "HomeduinoRFButtonsDevice",
      "buttons": [
        {
          "id": "up",
          "text": "▲",
          "protocols": [
            {
              "name": "switch9",
              "options": {
                "unit": 64,
                "id": 2472,
                "repeat": 25,
                "state": true
              }
            }
          ]
        },
        {
          "id": "down",
          "text": "▼",
          "protocols": [
            {
              "name": "switch9",
              "options": {
                "unit": 71,
                "id": 2472,
                "repeat": 25,
                "state": false
              }
            }
          ]
        }
      ]
    }

This would be awesome to control the volume of tvs or av-receivers, too.
My Yamaha Receiver Volume starts at -80db and goes up to +30db so there are 110 Volume levels.
Currently I got a rule, so one button-press simply sends three signals. But holding buttons would be so much cooler