Homeduiono RF-Codes for REV-Ritter Switch 008341L

SaxnPaule

Hello community,

I have REV Ritter switches but unfortunately I’m not able to find the correct configuration to turn them on/off by pimatic.

Here the debug:
1 OFF

20:00:13.435 [pimatic-homeduino] debug: data: "RF receive 916 292 9456 0 0 0 0 0 01011001100110010101100110011010101010101010010112"
20:00:13.439 [pimatic-homeduino] debug: received: [ 292, 916, 9456 ] 10100110011001101010011001100101010101010101101002
20:00:13.446 [pimatic-homeduino] debug: switch5: { id: 172735, unit: 0, all: true, state: false }
20:00:13.448 [pimatic-homeduino] debug: switch7: { unit: 0, id: 0, state: false }
20:00:13.450 [pimatic-homeduino] debug: switch14: { id: 875840, unit: 4, all: false, state: true }
20:00:13.453 [pimatic-homeduino] debug: switch15: { id: 875840, unit: 2, state: false, all: false }
20:00:13.455 [pimatic-homeduino] debug: switch16: { id: ‘D’, unit: 3, state: true }
20:00:13.458 [pimatic-homeduino] debug: switch22: { id: 172735, command: undefined }
20:00:13.460 [pimatic-homeduino] debug: switch27: { channel: ‘2111’, unit: ‘2110000’, state: true }
20:00:13.463 [pimatic-homeduino] debug: pir6: { id: 2861062, presence: true }
20:00:13.466 [pimatic-homeduino] debug: contact2: { id: 172735, contact: false }
20:00:13.468 [pimatic-homeduino] debug: contact3: { id: 172735, contact: false }
20:00:13.471 [pimatic-homeduino] debug: led4: { id: 54740, command: ‘code:00000011’ }
20:00:13.473 [pimatic-homeduino] debug: doorbell1: { id: 1108, unit: 1021, state: true }

1 ON

20:02:56.234 [pimatic-homeduino] debug: data: "RF receive 916 296 9452 0 0 0 0 0 01011001100110010101100110011010101010100101101012"
20:02:56.240 [pimatic-homeduino] debug: received: [ 296, 916, 9452 ] 10100110011001101010011001100101010101011010010102
20:02:56.251 [pimatic-homeduino] debug: switch5: { id: 172735, unit: 2, all: false, state: false }
20:02:56.253 [pimatic-homeduino] debug: switch7: { unit: 0, id: 0, state: false }
20:02:56.256 [pimatic-homeduino] debug: switch14: { id: 875840, unit: 1, all: true, state: false }
20:02:56.259 [pimatic-homeduino] debug: switch15: { id: 875840, unit: 0, state: false, all: true }
20:02:56.263 [pimatic-homeduino] debug: switch16: { id: ‘D’, unit: 3, state: false }
20:02:56.266 [pimatic-homeduino] debug: switch22: { id: 172735, command: undefined }
20:02:56.268 [pimatic-homeduino] debug: switch27: { channel: ‘2111’, unit: ‘2110002’, state: false }
20:02:56.271 [pimatic-homeduino] debug: pir6: { id: 2861080, presence: true }
20:02:56.274 [pimatic-homeduino] debug: contact2: { id: 172735, contact: false }
20:02:56.278 [pimatic-homeduino] debug: contact3: { id: 172735, contact: true }
20:02:56.280 [pimatic-homeduino] debug: led4: { id: 54740, command: ‘code:00001100’ }
20:02:56.283 [pimatic-homeduino] debug: doorbell1: { id: 1108, unit: 1277, state: false }

2 OFF

20:03:35.670 [pimatic-homeduino] debug: data: "RF receive 916 296 9468 0 0 0 0 0 01011001100110011001010110011010101010101010010112"
20:03:35.677 [pimatic-homeduino] debug: received: [ 296, 916, 9468 ] 10100110011001100110101001100101010101010101101002
20:03:35.689 [pimatic-homeduino] debug: switch5: { id: 174271, unit: 0, all: true, state: false }
20:03:35.693 [pimatic-homeduino] debug: switch7: { unit: 0, id: 0, state: false }
20:03:35.697 [pimatic-homeduino] debug: switch14: { id: 874304, unit: 4, all: false, state: true }
20:03:35.700 [pimatic-homeduino] debug: switch15: { id: 874304, unit: 2, state: false, all: false }
20:03:35.704 [pimatic-homeduino] debug: switch16: { id: ‘D’, unit: 3, state: true }
20:03:35.707 [pimatic-homeduino] debug: switch22: { id: 174271, command: undefined }
20:03:35.711 [pimatic-homeduino] debug: switch27: { channel: ‘2111’, unit: ‘1210000’, state: true }
20:03:35.714 [pimatic-homeduino] debug: pir6: { id: 2811910, presence: true }
20:03:35.719 [pimatic-homeduino] debug: contact2: { id: 174271, contact: false }
20:03:35.722 [pimatic-homeduino] debug: contact3: { id: 174271, contact: false }
20:03:35.725 [pimatic-homeduino] debug: led4: { id: 54644, command: ‘code:00000011’ }
20:03:35.728 [pimatic-homeduino] debug: doorbell1: { id: 340, unit: 1021, state: true }

2 ON

20:04:14.633 [pimatic-homeduino] debug: data: "RF receive 916 296 9488 0 0 0 0 0 01011001100110011001010110011010101010100101101012"
20:04:14.637 [pimatic-homeduino] debug: received: [ 296, 916, 9488 ] 10100110011001100110101001100101010101011010010102
20:04:14.648 [pimatic-homeduino] debug: switch5: { id: 174271, unit: 2, all: false, state: false }
20:04:14.650 [pimatic-homeduino] debug: switch7: { unit: 0, id: 0, state: false }
20:04:14.653 [pimatic-homeduino] debug: switch14: { id: 874304, unit: 1, all: true, state: false }
20:04:14.655 [pimatic-homeduino] debug: switch15: { id: 874304, unit: 0, state: false, all: true }
20:04:14.659 [pimatic-homeduino] debug: switch16: { id: ‘D’, unit: 3, state: false }
20:04:14.662 [pimatic-homeduino] debug: switch22: { id: 174271, command: undefined }
20:04:14.664 [pimatic-homeduino] debug: switch27: { channel: ‘2111’, unit: ‘1210002’, state: false }
20:04:14.667 [pimatic-homeduino] debug: pir6: { id: 2811928, presence: true }
20:04:14.670 [pimatic-homeduino] debug: contact2: { id: 174271, contact: false }
20:04:14.680 [pimatic-homeduino] debug: contact3: { id: 174271, contact: true }
20:04:14.683 [pimatic-homeduino] debug: led4: { id: 54644, command: ‘code:00001100’ }
20:04:14.685 [pimatic-homeduino] debug: doorbell1: { id: 340, unit: 1277, state: false }

3 OFF

20:05:47.764 [pimatic-homeduino] debug: data: "RF receive 912 300 9464 0 0 0 0 0 01011001100110011001100101011010101010101010010112"
20:05:47.769 [pimatic-homeduino] debug: received: [ 300, 912, 9464 ] 10100110011001100110011010100101010101010101101002
20:05:47.779 [pimatic-homeduino] debug: switch5: { id: 174655, unit: 0, all: true, state: false }
20:05:47.781 [pimatic-homeduino] debug: switch7: { unit: 0, id: 0, state: false }
20:05:47.784 [pimatic-homeduino] debug: switch14: { id: 873920, unit: 4, all: false, state: true }
20:05:47.786 [pimatic-homeduino] debug: switch15: { id: 873920, unit: 2, state: false, all: false }
20:05:47.790 [pimatic-homeduino] debug: switch16: { id: ‘D’, unit: 3, state: true }
20:05:47.793 [pimatic-homeduino] debug: switch22: { id: 174655, command: undefined }
20:05:47.795 [pimatic-homeduino] debug: switch27: { channel: ‘2111’, unit: ‘1120000’, state: true }
20:05:47.798 [pimatic-homeduino] debug: pir6: { id: 2799622, presence: true }
20:05:47.800 [pimatic-homeduino] debug: contact2: { id: 174655, contact: false }
20:05:47.803 [pimatic-homeduino] debug: contact3: { id: 174655, contact: false }
20:05:47.806 [pimatic-homeduino] debug: led4: { id: 54620, command: ‘code:00000011’ }
20:05:47.808 [pimatic-homeduino] debug: doorbell1: { id: 1364, unit: 1020, state: true }

3 ON

20:06:08.415 [pimatic-homeduino] debug: data: "RF receive 912 300 9452 0 0 0 0 0 01011001100110011001100101011010101010100101101012"
20:06:08.419 [pimatic-homeduino] debug: received: [ 300, 912, 9452 ] 10100110011001100110011010100101010101011010010102
20:06:08.426 [pimatic-homeduino] debug: switch5: { id: 174655, unit: 2, all: false, state: false }
20:06:08.429 [pimatic-homeduino] debug: switch7: { unit: 0, id: 0, state: false }
20:06:08.431 [pimatic-homeduino] debug: switch14: { id: 873920, unit: 1, all: true, state: false }
20:06:08.433 [pimatic-homeduino] debug: switch15: { id: 873920, unit: 0, state: false, all: true }
20:06:08.435 [pimatic-homeduino] debug: switch16: { id: ‘D’, unit: 3, state: false }
20:06:08.440 [pimatic-homeduino] debug: switch22: { id: 174655, command: undefined }
20:06:08.442 [pimatic-homeduino] debug: switch27: { channel: ‘2111’, unit: ‘1120002’, state: false }
20:06:08.444 [pimatic-homeduino] debug: pir6: { id: 2799640, presence: true }
20:06:08.448 [pimatic-homeduino] debug: contact2: { id: 174655, contact: false }
20:06:08.450 [pimatic-homeduino] debug: contact3: { id: 174655, contact: true }
20:06:08.453 [pimatic-homeduino] debug: led4: { id: 54620, command: ‘code:00001100’ }
20:06:08.454 [pimatic-homeduino] debug: doorbell1: { id: 1364, unit: 1276, state: false }

Could anybody help me?

SaxnPaule

The first three numbers of every received block change from time to time.
I tried to generate some blocks where at least two numbers (916 and 300) are equal:

1 ON
20:39:28.592 [pimatic-homeduino] debug: data: "RF receive 916 300 9484 0 0 0 0 0 01011001100110010101100110011010101010100101101012"
20:39:28.595 [pimatic-homeduino] debug: received: [ 300, 916, 9484 ] 10100110011001101010011001100101010101011010010102
1 OFF
20:39:50.624 [pimatic-homeduino] debug: data: "RF receive 916 300 9492 0 0 0 0 0 01011001100110010101100110011010101010101010010112"
20:39:50.626 [pimatic-homeduino] debug: received: [ 300, 916, 9492 ] 10100110011001101010011001100101010101010101101002

2 ON
20:37:14.440 [pimatic-homeduino] debug: data: "RF receive 916 300 9504 0 0 0 0 0 01011001100110011001010110011010101010100101101012"
20:37:14.443 [pimatic-homeduino] debug: received: [ 300, 916, 9504 ] 10100110011001100110101001100101010101011010010102
2 OFF
20:36:18.987 [pimatic-homeduino] debug: data: "RF receive 916 300 9508 0 0 0 0 0 01011001100110011001010110011010101010101010010112"
20:36:18.990 [pimatic-homeduino] debug: received: [ 300, 916, 9508 ] 10100110011001100110101001100101010101010101101002

3 ON
20:35:15.085 [pimatic-homeduino] debug: data: "RF receive 916 300 9488 0 0 0 0 0 01011001100110011001100101011010101010100101101012"
20:35:15.088 [pimatic-homeduino] debug: received: [ 300, 916, 9488 ] 10100110011001100110011010100101010101011010010102
3 OFF
20:34:33.990 [pimatic-homeduino] debug: data: "RF receive 916 300 9492 0 0 0 0 0 01011001100110011001100101011010101010101010010112"
20:34:33.995 [pimatic-homeduino] debug: received: [ 300, 916, 9492 ] 10100110011001100110011010100101010101010101101002

SaxnPaule

Switch19 is not possible, because the sliced values are not handled in the code (https://github.com/pimatic/rfcontroljs/blob/master/lib/protocols/switch19.js):
“01011” --> id = C
"10011001" --> nA
"1001" --> nA

I just noticed, that the switch is a 8342L and only the remote is a 8341L so the Switch19 should work. But how do I know the right config?

On the first switch is a “A1” printed, but using this for the config does not work at all.