Re: Supported devices (plug and play)
Hallo, thanks for > rolling1 - protocol <,
Brand: toom
Model: 1919396
Type: Switch
Description: Outdoor
Note:
Works with > rolling1 protocol <,
Sales packaging come with 2 switch and 1 remote control.
Remote control has 8 buttons (A B C D with ON and OFF).
Note that there is no ALL key.
Before the codes are determined, check with the remote
control which keays (A - D) switch the 2 switches.
Activate the Debug-Level in pimatic under Log / Messages.
Press the ON key for the corresponding switch until
you can record 4 different codes. Repeat this for the
OFF key. Then enter the codes in the config file.
The integration in config file have found here .
To use this you must configure your device like this in your config
{
"id": "licht1",
"name": "Licht1",
"class": "HomeduinoRFSwitch",
"protocols": [
{
"name": "rolling1",
"options": {
"codeOn": [
"011111110000111001011100", <-- 4x Codes for ON
"0111.Your Code here.1100", <--
"011111011110001001101100", <--
"011110011010111100011100" <--
],
"codeOff": [
"011110001011100110111100", <-- 4x Codes for OFF
"011110101001110001111100", <--
"0111.Your Code here.1100", <--
"011101110011101010001100" <--
]
}
}
]
},
Thanks.
