Hello,
i have an issue with an HomeduinoRFSwitch remote plug device.
To describe my setup:
In my living room i have a dreambox based SAT receiver (VU+ Solo). If i power on the device from standby to active, a script on the SAT receiver changes a VariablesDevice state.
This State change is the initial impulse to start everything else in my living room (turn on TV, Turn on LED behind sofa, LED Behind TV, turn on AV Receiver)
When
"$vusolostatus equals “Ein"
then
"switch on 💡 LED Leiste TV and switch on 💡 LED Leiste Sofa and press button yamaha_powertoggle and after 3 seconds press button lgtv_powertoggle”
But sometimes it happens that the “💡 LED Leiste TV” changes it state every second.
The log looks like this:
15:20:17.605 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:false Pin:0 Repeats:7
15:20:17.822 [pimatic-homeduino] debug: data: "ACK"
15:20:17.827 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:true Pin:0 Repeats:7
15:20:18.045 [pimatic-homeduino] debug: data: "ACK"
15:20:18.049 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:false Pin:0 Repeats:7
15:20:18.236 [pimatic-homeduino] debug: data: "ACK"
15:20:18.241 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:true Pin:0 Repeats:7
15:20:18.436 [pimatic-homeduino] debug: data: "ACK"
15:20:18.440 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:false Pin:0 Repeats:7
15:20:18.636 [pimatic-homeduino] debug: data: "ACK"
15:20:18.640 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:true Pin:0 Repeats:7
15:20:18.836 [pimatic-homeduino] debug: data: "ACK"
15:20:18.841 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:false Pin:0 Repeats:7
15:20:19.036 [pimatic-homeduino] debug: data: "ACK"
15:20:19.041 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:true Pin:0 Repeats:7
15:20:19.236 [pimatic-homeduino] debug: data: "ACK"
15:20:19.244 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:false Pin:0 Repeats:7
15:20:19.459 [pimatic-homeduino] debug: data: "ACK"
15:20:19.463 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:true Pin:0 Repeats:7
15:20:19.697 [pimatic-homeduino] debug: data: "ACK"
15:20:19.701 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:false Pin:0 Repeats:7
15:20:19.918 [pimatic-homeduino] debug: data: "ACK"
15:20:19.923 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:true Pin:0 Repeats:7
15:20:20.136 [pimatic-homeduino] debug: data: "ACK"
15:20:20.141 [pimatic-homeduino] debug: Sending Protocol: switch8 systemcode:24 programcode:C3 all:false state:false Pin:0 Repeats:7
....
....
The only way to stop it is to edit the device and save it or restart pimatic.
It only happend to this device and also absolut random. I have other remote plugs from the same brand without any problems.
Configuration of the device
{
"protocols": [
{
"name": "switch8",
"options": {
"systemcode": 24,
"programcode": "C3"
},
"send": true
}
],
"forceSend": true,
"id": "etekcity-c3",
"name": "💡 LED Leiste TV",
"class": "HomeduinoRFSwitch"
},
Any idea what could be the reason or how to go on with troubleshooting?
Thank you