pimatic and Max! Cube 1.4.5

---

Hi there,

i try at moment to get my stuff from my Max Cube to pimatic but i cant get it.

I try the Port 62910 and 48592. If i start the Software from Max! over my PC it will shown in the browser http://localhost:48592/, i check the IP from the Cube over my Router (Fritzbox 7490) its 192.168.178.24, But i get every time a Connection Error:

Port: 62910

error [pimatic-max]: Error on connecting to max cube: connect ETIMEDOUT 192.168.178.24:62910

Port 48592

debug [pimatic-max]: Error: connect ETIMEDOUT 192.168.178.24:48592
at Object.exports._errnoException (util.js:870:11)
at exports._exceptionWithHostPort (util.js:893:20)
at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1061:14)
20:39:48error [pimatic-max]: Error on connecting to max cube: connect ETIMEDOUT 192.168.178.24:48592
20:39:48debug [pimatic-max]: Error: connect ETIMEDOUT 192.168.178.24:48592
at Object.exports._errnoException (util.js:870:11)
at exports._exceptionWithHostPort (util.js:893:20)
at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1061:14)
20:39:48error [pimatic-max]: connection error: Error: connect ETIMEDOUT 192.168.178.24:48592

in a other Post i found i should Test:

netcat IP Port… i try it with both Ports and get everytime “Connection timed out”

What can i do?

@tehmilcho Have you exited the max application and also closed it (tray icon)? Only a single connection via pimatic-max or the max application is possible.

@thost96 said in pimatic and Max! Cube 1.4.5:

@tehmilcho Have you exited the max application and also closed it (tray icon)? Only a single connection via pimatic-max or the max application is possible.

Hi, no i dont … i try It now. Because the Information on the Plugin-Docu is very short.

Again:

debug [pimatic-max]: Error: connect ETIMEDOUT 192.168.178.24:48592
at Object.exports._errnoException (util.js:870:11)
at exports._exceptionWithHostPort (util.js:893:20)
at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1061:14)

@tehmilcho And with Port 62910? Try to restart the cube.

check that the icon in the windows tray is also closed. as already said, the cube only allows one connection.
we have had a similar discussion here https://forum.pimatic.org/topic/876/pimatic-max-connection-error
you can try to downgrade the firmware to 1.4.1 and start over again. see the last post in the above thread for a link.

@thost96 said in pimatic and Max! Cube 1.4.5:

@tehmilcho And with Port 62910? Try to restart the cube.

Soo … okay i disconnect the Power from the Cube and set the Port to default… than i wait… and wait … and now all working fine awesome! But just one Qustion i enabled the Internet Access… while i test it … is this needed for the Plugin or can i disable it?

ah ok! nice to hear!
the internet access is usually not needed afaik, since the cube and pimatic are now connected and there is no other connection allowed then.

ah okay… i give anyway a PW with from a Generator with 16 characters

Thx for this software and this community … its lovely how fast everyone trys to help you