Missing humidity in weather7 / Auriol sensor
Re: [Solved] Weather7 Auriol sensor without Humidity
Hi there,
I have an Auriol weather sensor which supports temperature, humidity and battery status. But when I add the sensor to pimatic as weather7, only temperature and battery status are displayed. Does that mean, that just the temperature is implemented but the humidity is not known how to be decoded?
Thanks and best regards,
neibeck
@neibeck Can you please add debug log data you get from pimatic-homeduino? Thanks
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Homeduino Log:
RF receive 476 1964 3904 9144 0 0101010102010101010201010201020101020103
RF receive 464 1968 3920 9132 0 0 0 0 0102020101020202010101010101010101020101010102010102010201
RF receive 464 1972 3916 9164 0 0101010102010101010102010202020202020203
RF receive 468 1972 3912 9120 0 0101010102010101010201010201020101020103
RF receive 460 1976 3912 516 914010101010102010101010201010201020101020104
RF receive 464 1968 508 3916 912010101010103010101010301010301030101030104
RF receive 464 1972 3916 9156 0 0101010102010101010201010201020101020103
RF receive 468 1968 3916 9128 0 0101010102010101010102010202020202020203
RF receive 468 1972 3912 9116 0 0101010102010101010102010202020202020203
RF receive 468 1972 3912 9112 0 0101010102010101010102010202020202020203
RF receive 468 1972 3916 9124 0 0101010102010101010102010202020202020203
RF receive 468 1972 3916 9136 0 0101010102010101010102010202020202020203Up: Any idea?
My weather sensor is actually from Bresser and sends temperature and humidity as well, so its just recognized as Auriol…
@neibeck “humidity” as part of weather7 has been commented out. I am not sure why that is, but it looks wrong to me.
https://github.com/pimatic/rfcontroljs/blob/master/src/protocols/weather7.coffee#L38
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Shall I try to enable it again?
And what do I have to do to enable it?
Does anybody have an idea?
you could edit the weather7.coffee in your rfcontroljs folder (don’t know where it is at the moment, somewhere in you node_modules folder. Just delete the #ind line 38 and try.
@neibeck Please also re-post log messages. The messages you posted earlier are truncated and garbled. Possibly this happened as you copied messages from the pimatic frontend. Please copy messages from the pimatic log file instead! The log file is located at /home/pi/pimatic-app/pimatic-daemon.log
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
I added the humidity to the weather7.js and it seems to be generally working. But according to the logfile the humidity shows “28” for example while my weather station display shows 73%. How do I calculate the correct value?
17:58:47.490 [pimatic-homeduino] debug: data: "RF receive 480 1952 3908 9124 0 0 0 0 010202010102020201010101020202020202020201010201010202020101020103"
17:58:47.511 [pimatic-homeduino] debug: received: [ 480, 1952, 3908, 9124 ] 010202010102020201010101020202020202020201010201010202020101020103
17:58:47.525 [pimatic-homeduino] debug: weather7: { id: 103,
17:58:47.525 [pimatic-homeduino] debug:> channel: 0,
17:58:47.525 [pimatic-homeduino] debug:> temperature: -1.4,
17:58:47.525 [pimatic-homeduino] debug:> humidity: 28,
17:58:47.525 [pimatic-homeduino] debug:> lowBattery: true }
hm… now the debug schows humidity of 60 and the weather station 74%… doesn’t make sense ?!
As I said before, without having multiple debug lines with temp/hum that was submitted you can not really read the signal.
Is the temperatur correct? (0.1-0.2°C may be due to different processing/rounding) In that case it would be enough to have a constant temperature reading and multiple humidity measurements.