Update notification dont work with 0.9 ???

t1m0

Does the script no longer work with 0.9?
If i load the link in the browser i get:

Cannot GET /files/home/pi/homeduino-changelog.log

  "class": "iframeDevice",
  "id": "pimatic-changelog",
  "name": "Pimatic Changelog",
  "url": "http://admin:bimbam@192.168.1.12/files/home/pi/pimatic-changelog.log",
  "width": 600,
  "height": 150,
  "border": 0,
  "scrolling": "yes",
  "scale": 1,
  "reload": 30

DDNRN

I think you posted the wrong device code to point on your problem.
In your pimatic device section there should be a device called "homeduino Version Request"
In the command line it must be a small change because actually “Master” is still for Version V0.8
Instead of /blob/master/… it has to be /blob/v0.9.x/… like this :
curl -s https://github.com/pimatic/pimatic-homeduino/blob/v0.9.x/package.json | grep version | grep span | awk -F\> {'print $11'} | awk -F\< {'print $1'}

I’m not shure if there are more changes needed to get actual version requests, and also not shure if you have a complete config for all things like in the HowTo: “Update notification and changelog for pimatic and homeduino”.

If you also using the “homeduino-online-installer.sh” script there could be a small enhancement if you are using other hardware then standard “Nano at /ttyUSB0” Port. >> Use two copy commands to save the “make” file before updating the homeduino files and afterwards copy it back before using “make upload”. In my hardware there is a second nano for a mySensors-Gateway and I already wrote the Homeduino Firmware to this controller.

t1m0

Thank you for help!!!
If i usw your command, i get:

pi@raspberrypi:~ $ curl -s https://github.com/pimatic/pimatic-homeduino/blob/v0.9.x/package.json | grep version | grep span | awk -F> {‘print $11’} | awk -F< {‘print $1’}

0.9.9

But i want to knwo whats new

leader21

sorry, i need to rework this …
has been ok on v0.8 but actually on v0.9 it is not really reliable atm

t1m0

Thanks!!!