-
Show your hardware
This post is deleted! -
This post is deleted!
-
@sweebee Is it possible to use an ATtiny84 with your costumized mysensors library for an PIR or somthing like this? I don’t get it…
-
smartphone headset case as enclosure for BH1750 light intensity sensor:
http://www.bilder-upload.eu/show.php?file=f96e90-1441472447.png -
@dk00000
Pimatic has finally arrived in the environmetal protection sector now
Nice ! I like the idea of recycling useful enclosures. your ultrasonic case looks great (and maybe next week you’ll get my surprise and embellish it - you already know about it)
@sweebee
could you please get in contact with @Hannes-S and help him with his question about Attiny84?
Thx!pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
This is what I am working on now, designed and printed by me
Follow my domotica project on http://maredana.nl
-
@incmve Looks great! Are you planning to share the whole project at some point? I am curious about how you plan to use the dot matrix display. Do you use the two segments to display floating full size symbols, e.g. symbols floating from right to left?
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
Here is my sketch https://github.com/incmve/RF-temperature-block
It’s a work in progress, atm I am using the matrix displays to display the temperature from the DHT11BETA
Follow my domotica project on http://maredana.nl
-
Here’s what I am building for my new house, I am planning to have almost all the house working with, pimatic, light control, some plugs, alarm, door access, heating, some sensors, and some other crazy but functional ideas.
For the lights I am planning to have a manual backup alternative if pimatic fails, or ex. arduino board breaks. This manual backup consist in putting for each light circuit a 2-way switch conected to the relay (that acts as another 2-way switch, even if everything is down/broken/shutdown (arduino, raspberry…) will work
I am not an expert, just learning!!!
So I wish to have some opinions from all of you!!!
-
@hp
nice! sounds like a huge project. but keep in mind that Pimatic still has BETA status. This especially mentioned 'cause you want to control heating. (as far as you meant your central heating … If steering the radiators with max! it’s ok, no life danger)
regarding your backup for the light switches, you could take a look at the intertechno itl 230 switches. those are RF receiver switches AND can be switched manually with a common wall switch.
but that requires a good rf sending range depending where your sender is placed. but usually receiving is more problematic.pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
This post is deleted!
-
I buid also a backlight for my tv. The project is called hyperion. There are some good howtos on the german Raspberry Pi Forum.
Currently it is running on a separate raspberry B+, which is automatically turned on by pimatic if the TV is on and the sun goes down. My plan is to integrate it on the raspberry 2 where pimatic runs.
Here a video and some pictures how it looks …
-
@magic-tune
OMG!! I like that!!
it’s a little expensive to build but i guess it’s all worth the money
thanks for sharing !!pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
@leader21
Yes you are right it can be very expensive. The price you have to pay is dependent on the existing hardware . In best case you need only the Grabber (5,67€) and the LED Strip (WOW 18€ for 5m I pay 60 a half year ago)
So if you own a raspberry and a sat- or AV-Reciver with AV-out then you can realize this for less as 25€ -
@magic-tune are you think the 30 led per meter are enough? how much distance you have with your tv to the wall?
-
@Harrdy
what you see on the pics and in the video is a lpd8806 strip with 32 LEDs/m on a 55’ tv with 4,5 cm distance to the wall. I have a second TV with 9,5 cm distance. The illumination area is mutch bigger. I’m satisfied with both. I think the difference between 32 and 30 is not so big and 30 LEDs/should be enough for a big tv. -
@magic-tune Looks great! I also made a DIY Ambilight this way, using hyperion as well. It switches automatically between TV input (via SCART grabber) and Kodi input. I’ve been experimenting with controlling hyperion via the HTTP JSON interface via pimatic. I’m currently able to control colors and effects from pimatic. Have you done anything like that as well?
It would be awesome to be able to have a bit better configuration options, which can be read via the hyperion JSON interface to pimatic. -
http://zooi.oostindie.com/view.php?filename=28220150908_160531.jpg
Clone of the RF box made by @incmve , but without the 3D printed box (hopefully this week).
In the meantime:http://zooi.oostindie.com/images/23420150922_182727.jpg
Based on the previous setup but now moving all the stuff from Arduino to ESP8266. Code is based on the previous code from me and @incmve and a lot of the HTML stuff from the ESP8266 project from @okadesdeLike my projects and help? Consider donating electroneum etnjwAKGPqF6omQWRmpp9u2BPyVDG9VuyRQjNJ1S8yfBdfR9qeUQ46kRy8KS2CNqbpNLRrsgmNW6F2TMzxmZgPrh6KctrkrYbm
-
OK, Code and hardware are a bit more functional at the the moment.
What is working:- ESP module will boot up, read wifi from memory
- If no wifi settings it will boot up in access point mode
- If wifi settings, connect to wifi - if connection fails fallback to AP
- Read temperature from DS18B20 and send to pimatic
- Receive commands over HTTP (currently : dim LED matrix, enable or disable LED matrix, force update of temp, reboot ESP).
https://www.youtube.com/watch?v=629tGILFOWc
In this video the ESP is truing to connect with wrong ssid/pass password. It will timeout and fall back to access point mode:
Like my projects and help? Consider donating electroneum etnjwAKGPqF6omQWRmpp9u2BPyVDG9VuyRQjNJ1S8yfBdfR9qeUQ46kRy8KS2CNqbpNLRrsgmNW6F2TMzxmZgPrh6KctrkrYbm
-
Hi all,
I have a question about those attiny85 with the pir sensor. I see a transmitter type fs1000a and That’s a 5 volt transmitter while you are powering it with max 3 volt. Isnt that to low for this transmitter or do I have to use an other transmitter.