[solved]Pimatic Max! Plugin broken since the last update

---

Since the last Pimatic Max! Plugin update, I have some big trouble with the window sensor. After open/close the window, first the temperature goes back to the right Temperature than after short time, the Temperature goes back to the open-door-temperature…

pimatic-max debug log:
http://pastebin.com/cSKbNa94

Video:
https://youtu.be/SQDgd3m5evI

@LinuxDoc Possibly related to the following code change which is part of the latest release: https://github.com/pimatic/pimatic-max/commit/a6037ec4ced2e6761192590630e2136a7c3fb261 . May be @sweetpi can help on this.

As a work around you can downgrade to the previous version of the plugin. Please let me know if you need further instructions for downgrade.

@LinuxDoc Thanks for the good bug report.

Are there any rules that manipulate the temperature while the window was open? If a rules sets a temperature while the window is open it is not send directly. The new temperature set point is saved and send to the thermostat after the window is closed. This is because the thermostat does not except temperature values while a window is open.

Hi folks!

Now when I used the pimatic-max plugin, my hole Pimatic System crashed.

Here are the Errors:

21:27:56.922 [pimatic] A uncaught exception occured: TypeError: Cannot call method ‘emit’ of undefined
21:27:56.922 [pimatic]> at /home/pi/pimatic-app/node_modules/pimatic-max/node_modules/max-control/index.js:48:21
21:27:56.922 [pimatic]> at MaxCube.send (/home/pi/pimatic-app/node_modules/pimatic-max/node_modules/max-control/index.js:62:5)
21:27:56.922 [pimatic]> at MaxCube.connect (/home/pi/pimatic-app/node_modules/pimatic-max/node_modules/max-control/index.js:46:10)
21:27:56.922 [pimatic]> at Timer.listOnTimeout [as ontimeout] (timers.js:110:15)
21:27:56.922 [pimatic]> This is most probably a bug in pimatic or in a module, please report it!
21:27:56.938 [pimatic] exiting…

have opened an issue on github https://github.com/pimatic/pimatic/issues/851
sweetpi will have a look on that

You can downgrade to the last useable version:
npm install pimatic-max@0.8.14

Fixed in latest release. It was a problem with the underlying max-control package. Therefore a downgrade will not help. However the error occurred only following a connection error.

@sweetpi Ok thx, back to normal

What’s the status on this one, please? An issue has been filed reporting problems with setting the temperature … “The right temperature is shown, but if I change the temp. after a short while it switches back to the old one and doesnt send it to my device.”. Is it a bug or feature?

https://github.com/pimatic/pimatic/issues/921